mini bike throttle help

[Rollin310z]

i want to know how a spring is put on a throttle so it can pull it self back together, my throttle gets stuck I have to twist back. I want to put a spring but don't know were or how if you have a throttle set up with springs post pic or help thanks:repuke: imp: new icons

 

[CarPlayLB]

Hey Rollin
There are way too many combinations out there for someone to take a stab at this. Pictures?
My local ACE hardware has a great selection of springs...I have put them in different spots for different applications...pics? I hear they are worth a thousand words!

 

[RobertC]

Hey Rollin,

You know, i've wondered the same in the past...hoping there was a standard method to facilitate this.

What i have observed on various mini's is a spring attached somewhere near the carburetor end of your throttle linkage, with the spring pulling in the opposite direction than the throttle turns.

Good luck, and have fun !

 

[buckeye]

What engine?

 

[Rollin310z]

ive gotte it thanks guys and it was for my briggs