GX200 with the following upgrades:
ARC Billet rod
Raceseng S2 Finned RevWheel Flywheel
Raceseng billet aluminum push rods
Raceseng 1.3 Ratio shaft mounted Roller Rockers
Head ported/worked by MDB (I believe its the 18cc)
Tillotson 304WX Bored and worked fuel circuitry
ARC Billet side cover
.310 Isky cam
This engine is a screamer, will rap out somewhere above 8500RPM. In no way is the shroud indicative to the age/abuse/wear of this engine. I took the shroud off an older GX200.
I have well over $1000 tied into this engine.
Will take $550 + shipping. Everything you see on the engine comes with it.
paypal preferred.
ARC Billet rod
Raceseng S2 Finned RevWheel Flywheel
Raceseng billet aluminum push rods
Raceseng 1.3 Ratio shaft mounted Roller Rockers
Head ported/worked by MDB (I believe its the 18cc)
Tillotson 304WX Bored and worked fuel circuitry
ARC Billet side cover
.310 Isky cam
This engine is a screamer, will rap out somewhere above 8500RPM. In no way is the shroud indicative to the age/abuse/wear of this engine. I took the shroud off an older GX200.
I have well over $1000 tied into this engine.
Will take $550 + shipping. Everything you see on the engine comes with it.
paypal preferred.