nice i had 35" tires on it for a while with stock hight suspention. The floors were not easy. The tailgate was actually totaly rusted shut. I had to get a new cross member that holds the tailgate from, jc whitney and i used 2 sheets of 3x5 steel for the back and made suports for it with bed frame angle iron. I just patched in the front sections wherever it was rusted. I welded it wherever i could and calked in some spots with seam sealer. Not an easy task. I actually did the bodywork twice because the first time i used alot of aluminum patches and rivets. Well aluminum and steel dont mix i know that now! So i used good thick steel and welded on the patches so it looks pretty good now but i think i did better bondo work the first time . Oh well. But other than the gas its a damn good truck super tough and reliable.