I just have many unfinished projects. I few months ago I decided to go thru all 7 of my mini's that have been sitting in a storage building and get them all cleaned and running. The first picture is a bike I built about 4 years ago got it running in the shop on VPc13 then put it away, when I got it the gas was skunk piss and the tank was all rusted. Tried phosphoric acid but the varnish from the gas gave it a film that the acid did not touch. Has to put a can of berrymans in it and soak it for a few days to dissolve all the gas varnish residue, then the acid treatment. I drove it and while it was very fast as it is a drag bike, the TC did not engage till 4500 RPM and on full throttle it held the engine at 7K till it fully upshifted and by then it was way faster than I was comfortable with. Just driving around at about 25 MPH it was at 6500 RPM and just too high for crusing. I also redid my other speedway Drag Bike, replacing the 196cc engine with a 234 tillotson build. Its just about ready to test. Thats the Nexttwo Pics. Also whenever I have the time, I'm playing around with the Flow bench testing heads for flow and velocity. Also rebuilt my kart engine with longer stroke bigger bore and replacing the chikuni with a HL375 Tillotson, its on the test stand ready to start up.