Hello all. I'm new to the site, new to mini bikes and new to working on any kind of motor. Recently purchased a motovox mbx10, replaced the motor with a predator 212, and added a header, intake kit and jets. The problem I'm having is removing the stock emulsion tube. I've removed the stock jet, no problem, but the emulsion tube has been a different story. I've hit every corner of the carb, picked the back wheel up and drop it, tried to wiggle it out with a screw driver and after 2-3 hours of this frustration , still have yet to get the emulsion tube out. Anyone have any helpful suggestions? Thanks.
