I have two bikes that I worked over last year, but we have just decided to move to SD, and I won't have room.
1. 1958 Trail Husky - $850 - It was sandblasted, and powder coated by the Powder Keg last year. It has two new seats, both wood and marine vinyl. Two new tires. An LED headlamp. New grips and throttle. It comes with two engines, and is complete. I have both of the bird cages for both sides, and they too are blasted. The original Tecumseh 12hp has been rebuilt with a new piston, rings, plug, and cylinder was honed. I don't have the Tecumseh running, as it's not getting fuel, and I don't know anything about carburation.
What it cost so far -
The bike = $75
Blasting and coat = $350
Rear tire = $150
Front tire = $65
LED = $45
Wood and new vinyl = $200
Piston, rings, hone = $145
Total = $1,030
I had offers for more than that last year, but turned them down thinking I'd have it for years to come. I will sell it with the Tecumseh and another known running engine.
2. 1961 PakJak - $700 - I drove up to Butte MT from South Jordan Utah to get this bike and paid the guy $400. The body was in rough shape, no rust, but the metal was starting to show. It ran and I rode it. I took it down and had it blasted and coated. The back tire was fine, but I bought a new tire. I also had the seats reworked, with new wood on the lower. It comes with the engine it had mounted and running.
What it cost so far -
The bike = $400
Blasting and coat = $250
Front tire = $65
Wood and new vinyl = $150
Total = $865
Contact me at 801-808-1248
1. 1958 Trail Husky - $850 - It was sandblasted, and powder coated by the Powder Keg last year. It has two new seats, both wood and marine vinyl. Two new tires. An LED headlamp. New grips and throttle. It comes with two engines, and is complete. I have both of the bird cages for both sides, and they too are blasted. The original Tecumseh 12hp has been rebuilt with a new piston, rings, plug, and cylinder was honed. I don't have the Tecumseh running, as it's not getting fuel, and I don't know anything about carburation.
What it cost so far -
The bike = $75
Blasting and coat = $350
Rear tire = $150
Front tire = $65
LED = $45
Wood and new vinyl = $200
Piston, rings, hone = $145
Total = $1,030
I had offers for more than that last year, but turned them down thinking I'd have it for years to come. I will sell it with the Tecumseh and another known running engine.
2. 1961 PakJak - $700 - I drove up to Butte MT from South Jordan Utah to get this bike and paid the guy $400. The body was in rough shape, no rust, but the metal was starting to show. It ran and I rode it. I took it down and had it blasted and coated. The back tire was fine, but I bought a new tire. I also had the seats reworked, with new wood on the lower. It comes with the engine it had mounted and running.
What it cost so far -
The bike = $400
Blasting and coat = $250
Front tire = $65
Wood and new vinyl = $150
Total = $865
Contact me at 801-808-1248