I need a Nelson muffler for a VT-8. I am looking for the round one that mounts to the fender and exits out the bottom. I appreciate any help with this. Any leads would also be much appreciated.
I found this to be a good option (see photo) . The one your looking for is not a stock muff. The stock Muffler is long flat and narrow. It tapers form about 3 or 4 inches at the back to about 1 and a half inch.https:/https://www.oldminibikes.com/forum/#/www.oldminibikes.com/forum/#https://www.oldminibikes.com/forum/#
I found this to be a good option (see photo) . The one your looking for is not a stock muff. The stock Muffler is long flat and narrow. It tapers form about 3 or 4 inches at the back to about 1 and a half inch.https:/https://www.oldminibikes.com/forum/#/www.oldminibikes.com/forum/#https://www.oldminibikes.com/forum/#
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.