WTD: Bird Wren Forks & Front Wheel

[Chickenfoot]

I just picked up a Bird Wren for my first project bike, the forks are wrong and it's missing a front wheel and tire. obviously i'm new to the forum and I'm not sure if there are aftermarket forks available or not. Let me know what you have. I'm located in So. California if that helps.

Thanks,
Mark

 

[Not so mini bike]

Post a pic of the bike. I might have some of what you're looking for.

 

[capguncowboy]

Post a pic of the bike. I might have some of what you're looking for.

These are the forks from a Bird Wren

I don't have them anymore, but a picture might help you locate some

 

[Chickenfoot]

Pictures

Lets see if this works...
You can see two little nubs? in the second picture. Just wondering if that held a sears tag... Might have a runabout instead of a Wren

Mark

 

[Not so mini bike]

Do you have a pic of the other side. Think I just bought some off of a member.

 

[Chickenfoot]

Here's a few pictures of the forks that we're on the bike
The wheel seems to be metal on the outside rim area and plastic on the inside?
Are there aftermarket forks that will wok on this frame?

Mark

 

[chipper]

my 2 cents , be patient , some one will have Bird forks !

 

[Outlaw Ace]

Sears Runabout was essentially a Wren but I think you are correct about the serial number plate rivets, I've had a few of both but my favorites are the center stand Wrens of which I have only had one. [/QUOTE=Chickenfoot;914863]Lets see if this works...
You can see two little nubs? in the second picture. Just wondering if that held a sears tag... Might have a runabout instead of a Wren

Mark[/QUOTE]

 

[davidlamb78]

I may have a set. PM me with some measurements, and I'll check. I don't have a wheel, only forks.

 

[Not so mini bike]

Front wheel you're looking for is just a Steelie? 6"?

 

[Chickenfoot]

I the rear wheel is a 5", I'm guessing that's what I need for the front?

Mark

 

[honested]

I have 2 wrens both have 5 inch steel wheels if that will help Eddie

 

[Chickenfoot]

Still need a set of forks for a Sears Runabout

Mark