7/8

New , used, whatcha got? I'll be at the EC race tomorrow in NY too

Hey guys. Looking for a clean solution for mounting foot pegs to an Azusa project bike. Has anyone used a handlebar mount like this? I hear a lot that the cheap clamp mount that come with the bike suck.

where are you guys getting 7/8 .083 wall tubing from. no one local to me has it.

I am looking for a set of brake Levers made by superior (japan), condition NOS. PLEASE PM ME IF YOU HAVE THEM.

Looking for a pair of nos cherry 7/8" right and left brake lever with the cable adjuster and ball end. Also interested if you have just a left or a right one. Thank you.

I have a 1" BTE bonanza throttle I would like to trade for a 7/8" BTE bonanza throttle. Also need 7/8" brake and clutch lever marked BTE, not sure if they were used on other mini bikes. Thanks.

Looking for the "Sonny to my Cher", need the THROTTLE side match to this cherry japan made grip for 7/8" bars so its actualy a 1" grip, with or without the throttle assembly as I have plenty of donors of those. Decent shape, scratches and some wear OK but no blown out or ripped outside end...

I am looking for nice soft grips for 7/8 handle bars. Can people make recommendations? Thanks Ralph

I'm looking for Doherty throttle with grips for a 60s doodlebug. I will try to post a pic of what I need. Thanks for looking. I have PayPal.

Hello, I am looking to cover the foot pegs on my ARCO, they are 7/8". I was going to buy the black Hunter Wilde style grips like this, and trim them to length. https://www.OldMiniBikes.com/3-4-Black-Grips-pair.html Problem is, OldMiniBikes Warehouse only seems to carry 3/4" or 1" sizes in black, I am...

any way to get this 7/8s shaft to work? I have a bushing but shaft seem short for drive ?

Looking for a cheap set of fork lowers with some springs to work inside 7/8" tubing to try and save a CCS charger frame. Dont hvae to be fancy just useable! If you got some lowers and springs from a trashed set of forks let me know...or if your collection would not be complete without a CCS...

I'm not sure exactly what bikes these were used on. For 7/8" handlebars. Made in England. Looks to be NOS. The Chrome is just about pefect and the grip is good aside from a little shelf wear. $40 shipped OBO

I need a set of bearings with an outside dia of 1 3/8" that will fit a 7/8" shaft. Where do ya'll get your bearings?

Picked this Taco up yesterday ! Runs good. Forks were spliced with 1" tubing Below the triple tree. I'll spice it back to 7/8" but still on the hunt for another set. Anyone out there making new 22 forks?

I'm in need off one 7/8" grip that matches the throttle grip. Used will do, it measures roughly 4-3/8" Shoot me a price to 15227. Thanks, Nate

Selling 6 Cherry Checkerboard grips in one lot,similar to the lil indian grips,but shorter,also look to be for 1 inch bars,some have nylon inserts,one is a 7/8 insert,so I guess they could be made to fit 7/8 bars with an added insert on the dummy side,Cherry Japan $40.00 plus $5.00 shipping

picked this up at a swap meet to day tubing is 7/8 I haven't ever seen a wheel like this ether

Anyone have links to swaged pipe pieces in 7/8 and/or 1"? Thanks-

Brand new set of grips. Just bought these at OldMiniBikes for just the throttle. Not the softest grips in the world but then again, the Hunt Wilde grips are not too soft.:laugh: 7/8 and 1". Shipped for $6.00 in the USA.