97cc

does anyone have a picture or diagram of the stock connections on the throttle of the baja 97cc engine? I installed the 6.5 but would like to get the connections back together on the stock before selling it. Not sure where the springs connect.

YouTube - baja dirt bug motor blow fast forward to near the end it blows at 5:25

Hello, First post... I have a Baja Racer 97cc mini bike just a year or so old. My friend who owns it said it ran good for a while and it just seemed to get weaker and weaker until it just wouldn't start any more. He brought it to me and I found the carb loaded with carbon, a weak spark...

I have a complete Doodlebug motor for parts here. It sucked a valve and the head is messed up too. I think the top of the block is scored but may be deckable and ok. Otherwise its fine and has like 3hrs on it. Carb,cam,tank,shroud,recoil,rod/piston/crank. $30+ship? Or trade for a working...

Ran into the local Tractor Supply store here in Galax, VA looking for snow boots for my daughters (and another snow shovel for the driveway). While there we noticed the little yellow Baja Dirt Bug mini bikes on display. They were on sale for $255 each and I mentioned to my wife we should buy a...

Anyone need a Stock clutch for Doodlebug / DB30? I have 2, $20 each plus shipping. One has at most 30 mins run time, One is brand new. These have a 5/8" shaft for #35 chain. I also have the DB30 97cc engines. same (one run <30 mins, one brand new/never seen fuel). I'd like $75 each plus...

I am picking up a doodlebug with a 97CC engine on it. and I have a few questions about them 1) My old co-workers use these engines on theirs and with a few mods they are flying around and keeping up with the 6.5 hp motor my old boss has. besides taking the governor off, what else can...

just picked up a Baja DB w/the std 97cc 2.5 hp motor. man, this thing lugs a bit. I am 190 lbs. what can I do? saw the 6.5 hp conversion kit. is this an easy fix? thx to all. colrhino

Here's a link for a 24mm carb for the stock 97cc motor. 97cc Carburetor with 24 mm Intake for Baja Blitz, Dirt Bug, Doodle Bug, & Racer Mini Bikes (Standard of Japan) Does anyone know if this would give any performance benefits??? Not that I'm going to go out and buy it, I'm just curious!

I bought 2 of these for my boys and one has been giving me trouble, leaking gas since it was a week old. It is leaking from between the carb and engine. Gaskets are good on the drain plug, bowl, carb/engine gasket. Fuel shutoff works and leak stops. I've had it apart float seems to be working...

Does anyone have any tips for my db30's power and acceleration?

Well, just finished this last night. I've had this K&N filter sitting here for a couple days now so I decided it was time to custom fab my own intake. Here it is!

Sup, Who here is rockin the 97cc with their homemade custom exhaust? I am wondering what size pipes were used and where's a good place to go to pick up the parts to build one myself. Cheers.

Ok as the title says I have a 97cc Mini Bike engine off a Baja DB with clutch it goes pretty good but need more power. I have had 30 mins on this motor about 15 starts and 2-3 mins runs in the drive way. Its still in the Bike and can make a video if you would like to hear and see it run. Like I...

My curiosity got the better of me today, so I went to the local Pep Boys today to look at the Doodle Bug's. I looked at the larger one which was $799, then I looked at the 97CC and it was $299. I thought the 97CC bikes were a little less than that, or did I just imagine it.:confused: I wouldn't...

i am looking for filter, box and any parts to connect this to the carb. then i need exhaust. paypal ready. i don't come on too often, so if u send a message to driftoy@aol.com, i can reply faster.