carburator

Hello, My name is mason and i recently purchased a coleman bt200x mini bike I purchased a mikuni (chikuni) 22mm carburator kit with filter for it and i cant seem to get it tuned correctly...... i have not touched the needle nor have i replaced any jets. I am currently using the stock jets in...

My mom gave me this mini bike from when she was 12. It's been garage kept its whole life and has cleaned up nicely. I'm not a big gear head so I would like some input on a new carburetor and brake for it. Seems to be the only things wrong with it. Thanks for any advice. Can't wait to get it...

I have a 5hp flathead and I need a carb and manifold. I have done a ton of looking around here for setups that work and so far I know that I can put on a mikuni 22mm slide carb, a Tecumseh carb, or a Tillotson. It seems to be really difficult to figure out which one specifically will work, like...

I'm looking for a Tecumseh 4HP Diaphram carburator part number 631588 Thanks Mark

I found a carburator for my kawasaki engine. Any advice on cleaning and rebuild?

Hello I'm trying to restart my Skat Kitty project. Have one issue though... The B&S-engine I've found has a Diaphragm carburator and I want to convert it to a "draft-carb". Since I want to use existing fuel tank on the Skat. Does anyone have any experience of such a conversion? Is it...

I'm trying to find a good carburetor for my 5hp Tecumseh engine. I have a twin engine go kart with stock tecumseh carburetors on it. But they are a pain, I am always having trouble with them. Who makes a good carb for a tecumseh. Delorto? I am going to try and make some more power with the...

is this a briggs carb. and gastank set up ???? ??? i just want to know what engine it goes to. thanks

can i drill the black pilot jet? and if so how much

took it apart, would love to know what engine it is 3.5 or 4 ? and can a lighting coil be installed? if so, where do i get one? This is for the Rupp Scrambler i am building in the build section need a carb kit too Thanks for your anticipated advice

Hello all :) I recently bought a throttle linkage kit from Northern Tool and I'm n ot too sure of how to put it on?? lol It has 4 parts.. A spring, a little bracket, a weird little piece that looks like it clamps to the throttle on the carb, and a tube for the cable to go in.. If anyone can...

Does anyone have aany or can take some, good image of all the linkage on a early (1970s) vacujet carb and a pulsejet carb. I have one of each that came with a 2 hp Goldenboy and a 3hp B&S and they were bare except for some damaged linkage. Some parts came with it but the images that I have of...

Hey guys, my grandfather has had this Doodlebug hiawatha for years, and he has decided to give it to me. It is really old, the brakes don't work at all,to start the engine I have to pull a string, and to stop the engine I have to put my hand on the carburator. It is a 27cc 3hp engine. I would...

what you guys run? happy with it?

I have a HM-100 tecumseh with a barely legible model number. It looks like it ends with 8P. What I need to know is, what carb do I order? It's mounted in a heald vt-10 The carb that is on it is a #640152. It was brand new and the guy that WAS working on this project said he had to put two ball...

wats the short tube on a briggs tank mounted carburater do an if you get excess fuel in the litle dish its in will it mess any thing up