degrees

Nice day in Michigan for a ride!! Not too bad for January!

Sorry if this has been asked before. I am interested in mounting a 212 in this sideways configuration, I will relocate the gas tank, but will the oil splasher work correctly and will the engine still run correctly?

what is the stock timing set at on 5 horse flatties? I need to know this value so i know how much to move it. also the offset keys come in thousandths. how many degrees per .020, or how do they figure that, is it 1 degree for every .010 offset?

At what temps does your little mini call it quits? All the way to 7 degrees i took my CT200U with its china motor. I was very impressed with the little critter, in warm weather it starts with 3 pulls, at 7 degrees (cold as it got here) it took 7. Once it cranked it didn't quit though...

About 3 months ago, actually longer than that ago, I was waking up at night with a terrible cough, sore throat, generally feeling crappy all the time. Wife said I was coughing, actually hacking all night long. I felt really rundown during the day because I was not getting any rest at night. I...

Recently picked up a Wards 525 frame to build a rider. There is much previous owner engineering to fix. Having never owned one before my question is, are the legs of the swing arm supposed to be parallel? The one leg is 90 degrees to the shaft, the leg with the brake lever angles away from the...

Bone stock Hemi, Haven't cracked the case open as I'm leaving the governor installed for now. I am however switching valve springs for durability. I have a degree wheel installed for checking timing because I also swapped out the flywheel for a Kohler with a lighting coil. So I was turning the...

did about 50 miles today with the boy

Does anyone have some insight on machining the stock key for 4 degrees advance? I forgot to order a key and don't want to pay $10 shipping on just a key. :thumbsup: I'm looking for how much to thin out the top of the key. Thanks!

By now, everyone who knows me or my wife, knows that I buy and redo old minibikes for a hobby... Pretty much everyone we meet either has an old minibike sitting out in a shed, or knows someone who does... Quite often, people will call us to ask if we want to come out and look at some...