I have 2 units of brand new calipers that are loaded with pads and still have the spacers to hold the pads in place. These have some sort of mounting bracket attached with the holes spaced 3 7/16" on center. They have covered braided hoses attached that are approx 24" long I bought these for no...
I would like a Lil Indian rear disc brake set up or some other one close to it that can be adapted to the rear frame bracket. If you do not have one please steer me in the right direction. I could really use about 4 or 5 of them. Thanks Gary M.
I am working on a lil indian and trying to figure out this disc brake that I bought from ebay for a arm and a leg:laugh: I think one of the pucks is to fat:shrug: Does any body know what the thickness should be of the puck? Thanks in advance. I will measure the one that I have:thumbsup:
up for sale is my Kelsey Hayes brake caliper. its in very nice condition. all the parts are there.. will need new pucks as the ones on it are worn down. one of the bolt heads was shaved down a bit to make room for the arm movement (previous owner could have bought new pucks for a couple bucks to...
Up for sale is a disc brake like the one linked below. It's never been used however the rod on it has been cut when I attempted to fit it somewhere where it wasn't going to, was being optimistic I guess. Has been taken apart but everything should be there. It's never been used. Comes as...
I've got a minibike that was recently finished except for brakes on the bike. After having a friend crash while riding, i think im going to need brakes. I tried a clutch brake and it didnt work. I have a disc brake but im not sure how to use it as my sprocket is very close to the tire as you can...
I'm looking for a couple different disc brake arms. If anyone has anything sitting around, please let me know. I'm trying to help a friend get a brake on his bike and we're not quite sure which to use. I know there are some variations in the angle of the arm so I'll probably be interested in...
Does anyone make a setup for forks that the caliper wouldn't hit the tire cause the forks are too tight together? Is it possible to put a rotor on a live axle on the outside of the forks? just thinking out loud here.
My forks only have about a 1/2 inch between them and the tire. You might...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.