early

Looking for this style Tecumseh oil fill plugs.... Please PM me. PayPal preferred. Thanks :thumbsup:

I have searched for a few days and cannot find any kart with a similar rear end or steering wheel. The guy I got it from thought it was a 1961 but didn't know the make. any ideas? Home built? Thanks for any insight free photo upload

Front and Rear LiL Indian 4 inch Hands Wheels with sprocket 150.00 plus shipping...

Were the earlier throttles Doherty on the 1" bar Bonanza's :shrug:

Hi I have a 1970s Monty Ward with a great running Honda gx160 that starts 1st pull . Bike needs completed tires are toast. Text me @ 313-574-1838 $200

Early Cat Mini Bike (R3001) we believe ?? Split rim front & rear.. Question ?? Do these split rim come apart to put new tires & tubes on ?? Any help greatly appreciated >> Marilyn <<

Here's a real nice vintage Lauson / Tecumseh I was saving this for my Dart Cyle restoraion until I re-located the original engine that was born in the bike. You can still see the shadow of the old Lauson decal: This is a 3-1/2 HP engine. It turns over nice, feels like it has...

Front axle not included. $225 + ship from 49221

Hi everybody I was given a H/F 18 volt cordless impact the 1/4" hex drive, from my son he loves his dad. I thought I would give it a try on the original engine from the Mighty Burro. I think the engine is a 8 or 10hp Briggs&Stratton from the early 60s. In the early 60s are the numbers still on...

And grabbed this....... teaser pic for now... more tomorrow.... best I can tell it is complete. Believe it to be my first true all OEM survivor. :thumbsup: lil Indian bearcat.

Here is an Caper Cycle on the bay.. :thumbsup: Caper Cycle Mini Bike Roller Vintage | eBay

I want a vintage bike to match my vintage 1971 VW bus camper. Has to be small enough to fit in the camper area, so has to be a smaller model. Total length about 46 inches? All suggestions appreciated!

Red frame in pic- fenders not included. Fork axle holes enlarged - will need repair. Hard frame to find. Will ship at buyers expense. $300. Located Sand Creek, MI 49279.

I found this ad in a 1962 Wall Stadium program I was thumbing through. Some of you may recall the story Rich Ludwig of Kustom Kart told about Stellar bikes and California Speed & Sport. They call it a "Scoot-A-Long"...but it's a Stellar product for sure. I would say this is...

Hi y'all. This is Jaramie looking for some information on where I could find a reproduction or old/new disk brake caliper assembly for a late 60's to early 70's Fox corporation Street Scamp? I have checked OldMiniBikes.com, but the disk brake assembly part#R9952 (which is the correct design) has...

I'm new to this forum and I haven't owned minibikes since the late 70's early 80's. I used to buy and trade parts with people in the neighborhood and surrounding communities and at (flex-o) on Venice Blvd.,in California. Now that I have kids that are old enough and are interested in minibikes, I...

Had this Fox Campus bike for long enough and didn't do anything with it, so off it goes to someone who can make use of it. Early 1963,64 era with the Front Battery mount and the Original Desirable Triangle head bolt. Also has Original Foot pegs with slats. Has an Old Briggs 3hp that has...

I would like to purchase an early Taco roller or frame to put my West Bend 580 or Clinton Panther in. Would love a Burrito, Frijole, Taco 33, 55 or any Series 1 model. Just want a restorable project. Cash or possibly trade my nos Clinton A400 Panther motor. Cheers, Oscar

I have an early swing arm model bonanza, I have had a few bonanzas in my time but never an early one. Anyways, on the early models with the adjusters behind the axle did they ever run them with the sprocket/brake assembly on the left side of the bike ? The tab for the brake cable is on the left...

Looking for only one Azusa 3 spoke wheel just like the pic. I was told it was a early style 3 spoke. I'm in Azusa California if anybody's close. Thanks for any help Sent from my LG-D500 using Tapatalk