fresh

head is milled .060, all new wf valves, wf dbl springs, ported (blended), new guides.... new 308 welded cam........(free) new piston ring set and good used animal piston with purchase of head and cam this will fit Inteks also... $160 plus ship of $12 for the set....

motor runs, (hauls butt) $650.00 or OBO plus shipping I am in Port O'Connor TX you can come and pick it up and i will even take you fishing will be away from computer today, but you can call me @ 361-655-2939 I will drain all fluids and crate it for shipping i do accept paypal Henry

Well, my family and I decided to go set up at a flea market and get rid of some unwanted items. I had no intentions of really bringing anything home but we all know how that goes when we're out and about with all kinds of goodies at your fingertips. As my girlfriend and I were walking along...

Looking for a farm fresh mini bike! Title says it all Im in mn

Block for sale. Never ran it, Cast Iron Cylinder Dual Bearing Freshly honed Fresh Hi-Temp Black paint I will include the lifters and the valves, along with the shroud. No flywheel, rod, cam, piston, or springs. I'll get pics eventually. $50 + shipping OBO

freshly built, rings, valves, arc rod, Crane 270 cam, 3hp steel flywheel, bearing side cover, new mikuni carb, milled head $250+ship "To state the obvious>>Bike not included"

fresh ohh60...steel cam, honed, new rings, valve job, mildly ported and milled head, new seals, gaskets...grade 8 head bolts....8mm coil wire.. I have the stock intake....The recoil housing neeeds finished,,,I was filling and smoothing all the extra holes for a clean straight cover... Block...

Just replaced all diaphragms and gaskets, carb is fresh and well taken care of. Set up (blueprinted) for a "mild to wild" Honda GX200/Clone on gas. This carb was bp'd by KornDog.:bowdown: $80 shipped, ninjas.

i got the 6.5 clone i bought here set up and running. i put it on my kart(sorry). the idle is fine after tinkering with the carb and jet.,thanks Mrbungle for all your help. with the required parts rod,piston,springs, and flywheel i was afraid to take it up to speed. it is fast, fast for a...

Up for sale is this Fox Street Scamp I believe. All original except for the motor obviously. I have two 5hp briggs that came with it. The motors are $40 each plus shipping. I was told they both ran before storage. I dont want to sink any time or money into them. The roller is pretty complete...

Not what I asked for because the snow was nearly gone and people around here were waking up from hybernation. A quick trip out to the far end of town near Garson revealed some at least 8 inch wide treads in line. Up over the highways and down the other side on Skead road near my brothers...

Everything was media blasted, primed with etching primer and painted black..flywheel blasted and painted Raw Cast... The engine was honed, new rings, valve job, cleaned up the ports, new gaskets and seals, carb rebuilt..... points ignition (new points included) air filter cover included...

hey all, its loudaddy (lou-daddy) this is my first post, i build hi performance aircooled vw motors and dragrace my 63 bug. i have a gokart i tinker with for the kids with a 6.5 tecumseh. i am planning on building a mini bike custom and want to use a raptor aor animal motor. just getting...

guy down the street gave this to me over the weekend. I think its an old Powell or maybe a Lil Indian...........JUST KIDDING :laugh: He made it a while back and just needed the space. i think its a briggs 8hp. not bad for free.

Finally picked up a mini bike today. Been looking off and on for a year and found this one on the local CL. I know this is not a vintage one but it's a start. My son Tim and I had been looking for a frame to start with but this one is running with a 3 HP on it. We want to put a 5 HP Briggs on...

I have a fresh Intek head milled .060. new animal valves, new dbl valve springs with locks and retainers, fully ported...never used It's installed on this engine but has never been fired.. $100 obo $11 ship I also have a very nice the billet jr flywheel and coil with 8mm wire for $75...

I have a fresh 206cc intek ready to go Short Block: 206cc block (single bearing/steel bore) BP World Formula piston assem New WMS billet rod 308 cam New CE push rods Jr Racecar billet flywheel 8mm plug wire Head: Intek head milled .060 ported New Animal valves New dbl...

LOL,not exactly. I just got this today and was wondering who made it. Anyone? :rolleyes:[/IMG]

Fresh chromoly sleeved gx200 block, Right now at 2.992" bore can go up to 3.080" bore if needed. Special machine work done to eliminate blown head gaskets up to 15.1 compression, kart track tested. Instant 5+hp gain over standard bore motors $310 shipped

Just got paid from work with a nice 130$ paycheck... gotta spend it on something.....:wink: PM me if you think you may have something useful :thumbsup: