gopower

5 inch GoPower wheel , The tire is shot 65.00

Looking for 6" GoPower wheel 72? tooth sprocket and brake assembly! If I can't find them the wheels are available.

6" Bonanza GoPower wheels, 1 good used Carlisle tire and well worn sprocket for sale. Barn fresh, the drum brake assembly is missing Have them on eBay auction right now with a starting bid of $200. Really just want to trade for some newer 6" aluminum Azusa wheels, tires and sprocket ready to...

Looking for a Go Power 60t sprocket (for a 6" wheel). Anyone help a brother out? :smile:

Looking for a very good 5" rear gopower for a gokart I have 2 front and 1 rear that are in very good shape but the 4th one is broken thanks ken

Seems quite a few people are looking for 6" GoPower wheels these days. Here is a set that I can offer for sale. They have been media blasted, ball burnished and clear chromated for future corrosion protection. $150 + shipping. Keep in mind that's about $100 for the wheels and $50 for the...

Here is a set of 6" GoPower wheels in very nice shape with very good "Adran" diamond tread tires (2 ply) 12.5/4.50/6...new bearings in wheels....175.00 shipped.

6" go powers, no cracks/dents/repairs, bearing holes good. and an NOS set of 5.30 General tires, never inflated (well the one got inflated for this pic) Stillin the wax coating. Tires are From Mathison's got hardware to put them together as well $200 shipped for everything or $150 plus...

I'm in need of a 6" GoPower wheel half. Really need the half with the valve stem hole, but would take either. Only need the 1 half but will be willing to buy the whole wheel or a pair if need be. Let me know what you have. Thank you.

I have two 5" keyed bonanza go kart gopower wheels, not the best of shape, one frt half has a chunk out of it and the other haves have some pits and cracks.. possibly useable for spare parts or to doll up and paint for display... pay the shipping and they are yours.. I also have the axle...

I successfully drilled out a stuck screw head and then knocked it out with a punch. The inside of the wheel had a chalky corrosion dust from the unplated aluminum wheel. I would guess that I should paint the wheel inside and out to prevent further corrosion? I was planning to look for...