hooking

Trying to wire up the lights on my trail horse which is a first for me. Tail light has a brown and red wire headlight has 2 whites. My engine has the standard plug with the red black and green. I was planning on running The brown from the tail light , one white from the headlight and one wire...

sooooo... I'm trying to figure out a way to my throttle cable to the Tecumseh carb I have. I was hoping someone else here has been through this in the past and can help me out. thanks for any help I get, Lyle

Hello Everyone, I'm trying to hook the governor back up on a 1969 B&S 5HP engine with tecumseh carburetor. The governor arm is there, but I can't figure out how to hook it up. A link to pictures on how this is done would be great. Thanks for your time and help, Lyle

I have used the old Ariens snowblower headlight kit that comes with a AC bolt on generator that bolts up to a special Recoil assembly. The recoil has a hole through the center to accommodate a shaft that mounts to the flywheel nut, the shaft is what spins the generator. The generator is AC...

Need two of part 30199A for H60 motors im trying to put into service. This is the speed bracket recommended in the Tecumseh section on hooking up big block throttles. I found all other parts for this hook up. This part is nowhere I can find..

I got the lighting coil hooked up as u see in the pics we used the rectifier....how will I hook up the headlight and tail light when I get one...

we bought a light off of ebay for our chopper it has a robin 7hp motor with a light blue and a dark blue coming out from the lighting coil, the new headlight has blue with brown stripe. and black with brown stripe and red with blue stripe.....any ideas on how to hook the light up? we are going...

Hi, I have a Rupp Enduro and I'm trying to put a Tecumseh H50 in it. How do I get the throttle hooked up with a slanted intake?

I was reading the owners manual of my DB30, and it says that there is a transistor magnito on the 2.8hp to run the kill switch. Would I be able to power a light off of that? :shrug:

anyone have an idea how i can hook up my thottle so it pulls from the front of the bike and not from the read with the cable having all the curves in it. i want to make it short and thought with some linkage i could make it a straight shot from the throttle. any pics of how to hook up the...

Here is one example of how to hook up your throttle On a Tecumseh with out the governor installed. This example is on a HS50 but the principle can be applied to any of the Tecumseh L head engines. The parts are things I had in my shop. The bell crank is from a mini bike throttle control that...

New here, Have a question. It is a GC160 - 5.0 hp Honda Not sure where to hook it up. I loosened the nut that holds the throttle in position, Can I just hook the cable to that arm? The govenor kick in, will it ride fine like that? I am waiting on a throttle control and a brake cable in order...

picked up a downdraft???at least that's what they guy said it was ...carb for my "project cheap minibike" off evilbay,,,but i don't see how to hook a throttle cable to it... it appears as if the cable would have to come in from the bottom...i can't find any place to attach the...

i found this on youtube:smile: kind of funny to watch. couple kids hooking up a poor man's nitrous bottle..................:scooter: YouTube - Motor Scooter with Nitrous Oxide (Whipped Cream)