ignition

I was wondering what type of ignition the 1968 Briggs and Stratton engine has in it. Is it magneto or some other type?

Can someone give me some info on this Briggs 5hp? Steel bore, bearing crank, electronic ignition, year? Thinking on buying it. Don't have a model number.

Hello - Does anyone know where to purchase an ignition coil for my Tecumseh HS40? The bike has lights. Thanks Tom

Hi i have a problem with my moto skeeter 450 IGNITION COIL, it *****ed. www.mbw.com/pdf/manuals/divConstr/EC10D.pdf Parts that i would need page. 6 fig. 6 , part 2 and 3: 106-70110-08 Generating Assembly 106-70247-08 T.C.I. Unit Seems there is no way i can get these so i...

I was timing a tecumseh the other day when it occurred to me the sound level on my multimeter was very low. Much more faint than the last engine I timed. At first I thought it was the noise level around me but no this was distinctly fainter. When all was put back together I did not have...

K guys after some working and building my clutches to work properly I was sitting around thinking about performance upgrades that could be cheaply done. as of right now I have Rlv header .035" main jet K&N air filter Soon to have 1.3:3 rocker arms gx140 E-Tube My predator is the hemi model...

So I bought some parts for my predator and the cam says use stock ignition timing but also use a billet flywheel. I have the arc flywheel but it has the advanced timing built in. Am I ok to use this setup? Thanks for any input

Anyone have one they can part with?

Is the CT70 ignition compatible with the XL70? It looks like the wire layout is the same.

picked up a fluke capacitive clamp on sensor that lets you look at secondary ignition waveforms on an oscilloscope. here is the set up. left to right, the USB digital oscilloscope, the clamp, a laptop for viewing: here is the clamp on sensor attached to the ignition wire on my...

Syncro Mag Solid State Ignition Coil Tecumseh Briggs Stratton N O S | eBay

So being that I have some time on my hands I just started to take apart a Briggs 3.5hp. I was searching on YouTube and there was this guy with a MSD car coil on his Briggs (might be different). Does that add just a little bit of power? Is it worth the effort? I have time on my hands so if it...

Got a question for you guys. I have a 77' CT70 and it doesn't have an ignition switch. It's impossible to find a NOS ignition with a key for this year. Can any other year ignition switch fit on this bike? The connector looks the same on one that claims that fits a K1-76'. If the wiring harnesses...

So I barely get started on this new project when something, I know not what, infects my computer and burns through both my hard drives like nothing I have ever seen before. C drive gone and had to be replaced. E drive corrupted and we are working on getting the data back. :censure: During...

3.5 HP Tecumseh PowerSports Ignition is made like a Briggs flathead with external ignition coil.

I bought a 77' CT70 with no keyed ignition on it and I was wondering what wires I have to have connected together to get it to run. I want to say there's about six wires hanging out.

Because connectors look the SAME, you can burn up a new AC-powered CDI module by connecting to a DC-powered CDI wiring system.

I originally posted this on 4cycle in the clone forum and I think most people there couldn't care less. Minibikers seem more interested in off-the-wall things, so here's some select copypasta from that other thread ------------------ A series of events this year landed me several MegaSquirt...

Could I set it for any direction does it matter? Thanks

I inherited an old Massey Ferguson 7 riding mower with a H70-130076A, Ser. 2333R on , It was left in a storage building after somebody attempted to work on it and I can only assume they lost all the Ignition parts from under the coil, and I can't seem to find the correct donor parts for it. I...