performance

Finally got around to digging out my Raptor 3 engine crate, taking pictures and listing it on eBay. http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&toolid=10001&campid=5335845805&icep_item=254988279427 Any questions let me know. Have decided I will never get to my Bonanza project...

Looking for possible performance parts for the Murray track 2, which is an h35 powersport.

Hey all, recently purchased a stage 1 performance kit and had a couple questions, ive installed a few of the items in the kit already but was wondering what the rod with the thread at both ends (pictured) was for? I couldn't seem to find it in the description. The other thing is the header pipe...

looking for billet rod and performance cam for several motors. A hs40 and a H50. 240-299-0644

And I found out its a really tight fit. I had to take the muffler protector off, and air filter cover off. The gas tank cap/knob is centered, so you can't use it with the tank on. I will take the one off the original baja motor and use that if it fits the lifan. The metal tanks hang a lot...

What performance part do i have to get for my Hensim 6.5 hp 196cc it have to be honda clone parts ? or predator 212 parts would fit too? :thumbsup:

Hi, I'm new to the site, I have a Coleman CT200U with a custom stainless steel straight pipe. Anything good to add to it in general? Thanks. :thumbsup:

Our son bought an 8hp Predator 301cc for a gokart project and he wanted to know what performance parts are available? I'm not sure if gx270 or gx340 parts interchange or if this engine is all by itself... any info would be great.

Anyone coming to the PRI show in Indy this weekend. If it has to do with racing from the machinery to produce the vehicle and its powerplant to the vehicle to transport it to the race, it will be there. I said last year that it was my last but the memory of the discomfort from all the walking...

What's the best parts to put on a 69727 non hemi 212cc with the rtc-9 head? I ride a 2-speed auto motorized bike that currently tops out around 55mph. The engine currently has a 19mm slide carb, 4* adv timing, removed governor, removed fan and shroud and set up as a rope start, and now has a...

Looking for a cam, billet rod, 1:3-1 ratio rockers, big valve head..

Where can you get a performance air filter for a Tecumseh ohh60

I am running a predator 212 non hemi with billet rod and flywheel. I am wanting to make my bike into a full out drag bike. Is there a major difference between the non hemi and hemi style? Does one have more potential than the other (possible bore sizes and valve sizes)?

Dyno Cams DX290 grind, used, but comes with what appear to be new springs, lifters, keepers and retainers; $40 shipped Comp Cams GP9340, .231" lift, 3800-6200 RPM range, according to paperwork with it; $20 shipped; Tecumseh Star Jr. Dragster cam, Vortex , possibly from VKE, $20 shipped...

I have a 1970 H50 ... I bought a new stock piston, rings, gasket set and billet rod. Any suggestions to pump it up a might ... I can shave the head, smooth the intake and exhaust ... how much can be shaved safely? Thanks Kevin

Looking for the option performance exhaust for the Rupp tt500 and 69 roadster. Let me know what you have thanks.

Is there a performance coil out there under $100

looking for a cam 275-310 lift, billet rod, 92mm piston, 5/16 guide plate.

I havent touched my mini bikes for a few years until recently, now getting back into it and looking at all the sites for performance parts i see parts for the predator 212cc hemi and non hemi. I did the 6.5 swap on my db30 probably almost 6 years ago now, my engine is the blue one from harbor...

I ripped apart what I believe is a h25 and found something's that don't look stock. Like everything. Retainers, piston and rod, cam? It has an oil pump setup to lube the journey's where the cam sits on the side cover. Studs in block to bolt down head. Rod bearings. Looks like someone tried to...