powder

I had the forks powder coated for a restoration bike I was working on but changed direction on the project. The reflectors are NOS. The bolt & insert plastic fork bushings are included. $40 plus S/H Call or text with any question. Thanks, Charlie (860) 483-1578

Please post a picture of the painted bike, the paint/powder coat name and code to make it easy for others

so I've purchased a fat tire kit the frame and forks are straight, the welds are pretty good I used a lathe to make the axle spacers spot on frame back from the powder coater, it's a bit darker than the sample making a 1-1/4" spacer to fit under the adjustable engine plate

I am getting ready to send my frame off for powder coating. Before I do, I've got to order the color I want. How much powder should I order? It comes in pounds. It would probably be best to have a little extra in case there are any mishaps or it requires a second round of coating. I'm coating...

Here is another project that I had in the garage hanging in the loft for 3 yrs. Picked it up from Randy a few years back and had it powder coated and never put together.

Does anyone know if they make a powder coating similar to the Plum Crazy Purple?? I have a Ruttman Wild Goose frame I wanna have powder coated that color!!

I was just curious how much a mini bike hornet frame would be worth. It has a powder coated frame . Its just forks n frame.

I've seen a lot of members saying that they are dropping their frames off to get powder coated. I was at harbor freight the other day and it was 99 for a powder coating kit. Is powder coating not easy? I have no idea. Don't get me wrong I'm not trying to make the powder coaters of the world mad...

Question about using filler and powder coating. One guy at the shop said you can't use ANY type of fillers if your powder coating - apparently the oven cracks fillers such as bondo. Have to fill w metal only. Another guy said you can use a product called "Lab metal", which is a 2 part product...

moto skeeter

Hi I am curious about powder coat in relation to pressing a bearing using heat. On the fork legs, I have to press the oilite bearing into the top of the leg. I was going to use the method of sticking the fork leg (after powder coating) into the oven and putting the bearing in the freezer (or...

Can someone suggest a good Powder Coater here in southeast Michigan? I just picked up two Wild Goose rollers (thanks Cheezy1) and we are planning on having them coated. I called a couple shops and they quoted me about $200 to blast and coat with standard colors. Things will go up if I order a...

I had a piece of tubing powder coated with chrome powder. Here is a comparison I did. It might help those thinking of using chrome powder. I like the finish, it's not chrome but is much cheaper. Left to right: silver paint, chrome powder, stainless steel, chrome Top to bottom: silver...

From top to bottom: silver paint, chrome powder, stainless steel, chrome

From left to right: silver paint, chrome powder, stainless steel, chrome

Wildcat roller new tires all new powder coat new bars new clutch new rlv chain springer forks all new bearings new jackshaft with sprockets new throttle new alum riser block will post pics as needed asking 700.00 you need a motor and rear sprocket for complete runner no fenders

Has anyone done a powder coat vs. painting the frame? I have a place around here that does the powder coating, just not sure it is worth the extra money.

Hi All, I finally have my PakJak frame and forks all sandblasted and ground down. My question to you is, what primer can I use that is happy with a powder coat process. I do want to protect the bare metal from rust till I powder coat but I don't wish to impede the process and have to remove it...

Ok I have a 69 rupp that has been painted once before looks ok but I am thinking of having the parts powder coated a blue and the handle bars a black chrome powder coat due to some rust pitting the PO before painted the bottom section silver so they are no longer original so I figure a custom...

Anybody have any experience doing Castolin powder spraying? I'm trying to repair some shafts with this system I just got,I have the equipment but have no idea what I'm doing.