remove

Hi, a friend suggest that I remove the govenor via this posted method. His engine is the genuine Honda engine. I wanted to run this by you guys and make sure it is safe for me engine. Please view this link and let me know what you think! The Chicago Garage - View Single Post - Freebeer's Mini...

need help ...trying to remove the jackshaft which has a sprocket on it and lock collars and brake.I already remove all set screws but darn things will budge to move them so I can slide the shaft off. The reason why I'm trying to remove the shaft is I need to paint the frame. thanks

ok here is how to get the flywheel nut or sprag clutch off a brigs and stratton with simple hand tools . ok here we got a block we need the wheel off but cant get it to stop spinning . well remove the spark plug feed in some small rope here im using about 3/16 dia rope about 2 feet keep...

ok here is how to get the flywheel nut or sprag clutch off a brigs and stratton with simple hand tools . ok here we got a block we need the wheel off but cant get it to stop spinning . well remove the spark plug feed in some small rope here im using about 3/16 dia rope about 2 feet keep...

okay guys, im at my shop right now, so the quicker the answer, the better:thumbsup: okay, so the only thing holding it on the shaft is the key, how can i get it off the shaft, i dont have a gear puller... thanks guys

Does anyone have a step by step pictures of how to remove the governor on the 2.8hp DB30? NOT THE 6.5HP CLONE! :shrug:

After I've removed the centre nut, do I need a hub pull to remove the fly wheel? Is it keyed, so it only goes on in one position, or do I need to mark its position to stop it from loosing timing?

Does anyone know how to remove the valve stem on the DB30 rims? I had a heck of a time getting the tires off the wheel, and really hated the 10 LBS of green slime the previous owner had in the tires. I did some research and it looks like if you remove it you should install a new one. Do the...

Hola! Question.....I am working on a old briggs 6S....swapping it out for a new motor....My question is, how do I remove the flywheel from the shaft? (newbie) I know on the back of the shaft, there is a alen screw....but judging from the front of this picture, it seems there might be a...

hey guys, first post so i hope that you can give me some help. i purchased a 6.5hp honda clone from greyhound (one of the harbor freight motors) and im looking to remove the governor and a few "cheap" modifications to it so that i can get better performance out of it. i am past the break in...

Why simply remove the governer from a clone and leave it stock? Did the easy starting and reliability bother you? I can totally see doing it on a purpose built race engine with billet rod, flywheel, big cam, carb and pump etc. as these engines are generally started with an electric starter and...

I have been doing some searching around here the last couple of days on how to build up a flat briggs. I noticed the brow removing was a good way to make more power with other mods. While searching for pictures of this mod, I notices some people just do the area in between the head gasket...

How do I remove the wheel from the axle? I got new tires and I need to take the wheel off to put them on, so how do you get it off? Is there a special trick or tool needed? Any help will be greatly appreciated.

Do i have to have these pressed in and out?..Gave them a couple of good whacks with a hammer and punch and they didn't budge.

The title explains it all. I'm about to get a DB and I don't want any of those corny stickers on it but I don't know how I would get them off without messing up the paint job. Did any of yinz do this and how did you do it?

I can trim it to fit around my jackshaft but do I really need it?

should i get a valve core remover or is it not needed? how do i break the glue lose? :xomunch:

yeah, long titles FTW

i unscrewed the little allen wrench thingy but what do i do next? :hammer::crying:

What would happen running chain direct concerning increase in torque or less and more top etc....