setup

Has anyone tried doing a hydraulic foot brake setup on an old school mini?I'm thinking about trying to use a piston setup from a dirt bike or atv for my rear brake,they're relativly cheap to buy but I dont know how much of a pain in the :censure: it would be to fab up the brackets to make it...

Any thoughts on how someone would have two throttle controls running the carb? Thinking of using a foot throttle on something like a racing lawnmower with a regular throttle control for when I don't feel like using the pedal. Kinda like some utility tractors. The hand throttle says where you...

Can I get some good close up pics of some brake band set ups? I am adding one to my mini, and need to see brackets and how they hook up. Thanks so much in advance. Dooner

In the more than two wheels forum I asked, but figured I would ask a little bit differently here... as more people here are using the TAVs.. This is on the recently reconstructed Yerf Dog Kart I picked up a while ago, and this weekend everyone got to do laps in around the house... after...

Hello, Anyone have pics of their governor deleted vintage 3HP Briggs throttle cable setup? Most aftermarket setups are for the 5HP> Thanks!

Been hoarding some parts for my kids off road go kart. Its a yerf dog 2 seater. I'm more resourceful than rich and also plan to keep the governor intact for speed/safety reasons. Here's what I have and my plan. Please critique it. Gx200 clone Flat top gx160 piston and Honda rod 14cc head...

54 LED'S 5" Diameter- 350 Lumens $34.95 https://www.surpluscenter.com/item.asp?item=12-975&catname=electric Battery 12v-5ah/20hr- $29.99 (My Store) List: Search for 'es5-12' | O'Reilly Auto Parts 4.5" Diameter- 1350 Lumens $50.95...

*****SOLD********* Here's a nice complete vintage setup I've had stashed for some years...would work nicely on a vintge kart or trike....I'm sure you could even adapt the caliper to a mini bike as it doesn't loook much different than the 200M model.. Everything is here...mounting...

Looking for Bird Duck seat set up with shocks and all that other jazz let me know what u got.

I'm looking to put a rear brake on my 69 Rupp Roadster. Thus far I am unable to find the 'correct' rupp brake parts ( WOW, that's a surprise). In the meantime, I want to put a rear brake on it. Does anyone have any ideas or suggestions for a break setup I can use ?, but not a scrub brake...

i have done searches and cant find any pics of the b&s 2hp governor setup :shrug: any help would be great the model number is 60102 thanks:thumbsup:

So I have this setup from OldMiniBikes and have a pretty good idea how I am going to hook these brakes up.. I going to use a foot brake the activates the brake lever...but connecting the brake to the frame is my question.. I was going to weld a small bracket onto the frame so that I could bolt it to the...

so i just got this baha warrior, and was told its 100% factory, aside from missing things.. should the belt pulleys be this far out of alignment? when u give it gas it clunks and pops as the belt tries to catch. there is no sideways adjust for the engine, just forewards and backwards.

i just searched and read a lot of brake threads and I didn't find anything that helped. what will i need to get front and rear brakes on this bike i just picked up? i liked how simple the band brake on the cent. clutch was, but i'll be using a comet 30. i'd really appreciate any...

On the older Tri-sports that had 3 band brakes, how were they configured. I mean, the right/left turning are a given but what about the 3rd jackshaft brake? I am assuming it was on the left handlebar but.... was it mounted high or lower then the turning lever and were they all 1 mount or 2...

Nice Tilly. Billet fuel cap and radiused filter adapter. Got it from Nate and it looks clean. $55 shipped. Sent from my DROIDX using Tapatalk

I was wondering what the best setup for wheelies is? Meaning frame power gearing ect. Kind of a loaded question I know.

Cheeftah BC1000 frame, custom engine plate, and everything else. Restored bike, adjustable forks, Lots of new parts. Fresh 6.5 engine, premium exhaust, port matched with expansion chamber. Gas tank is not repainted, nor is the exh. expansion chamber. Has new sprocket, chain and tire...

Is there a way, using only stock parts, to hook up a throttle for the GX200? I loosened the nut so that the arm moves freely and added a spring that holds the throttle closed when not supposed to be open. But how and where would I hook up a cable? Because it needs to pull the opposite way the...

piecing together a mini bike. Looking for a set of wheels let me know what you have. 6" wheel prefer or 8 is fine.