slide

Hi everyone. I am building a 5hp Tek HS 50 engine for my mini and the engine is missing the cab. I dont want to put a non adjustable lean jetted stock style carb that you can order outta the lawnmower catalogs, would like to install a adjustable jet style carb that was on all pre emmision small...

Sold

I bought this for my MX100, it surely didn't look THIS big when I bought it off Ebay. It ended up being a 30mm round slide carb off a YZ100F. The seller won't take returns and I wanted to offer it here before I put it back on ebay. Everything looks to be in good shape. $50 shipped...

Good Carb for 3" bore Honda GX200? Baroni 3-jet 29mm Slide Kart Carburetor Formula-A,K ICA - eBay (item 360329889683 end time Dec-26-10 20:32:22 PST)

Ok guys I took the 22mm off and put on the 24mm. The bike did not like it. The bike ran like it was lacking fuel I left the carb as it was out the box. My bike struggled to spin to 6700 rpm and it was surging on the top end. It started up great and idled just as well. But the performance was...

Hi guys, what main and pilot jet is everyone running on there 6.5 clones? Or atleast what is the starting point? I have a modified 6.5 clone motor with the following: billet rod flat top piston arc fly wheel 14cc head stock(soon to be big valve 18cc head milled .065) 8 advanced degree...

Does any one know what intake adapter to use for a 26mm round slide mikuni for a 6.5 clone?

I'm a new guy on here so I figured I'd try and offer a little tech to maybe help some folks out. I've read on here where some guys are struggling with loose choke slides on these carbs. Some even replaced the whole carb with a different setup just because of this issue. As you probably...

need the cap needle spring and slider valve:scooter:

Looking for 1 or 2, 3hp or 3.5hp B&S Slide Choke Pulsa Jet Carbs for the standard (deep) fuel tanks. Must be in good condition with good pickup tubes Would prefer non fixed jet. Please contact me via PM. Thanks !!:smile:

Hent, What do you think of this Idea? Use Wayne's and Randy's brochures as a slide show. Think about it. If not hard to do. Unless you have plans in the works already. Just an idea throwing it out there. Thanks John

which round slide carb size would fit a 5hp B&S flatty the best? 19, 20, or 22mm? I know that the 22mm fits a 6.5HP clone very well, so my guess would be the 19 or 20mm, but does anyone know for sure which of the three would work the best?