spark

I have h50 which is lighted. When I hold spark plug clip by itself to finger no spark When turning motor over. When I hold spark plug clip in hand and touch with finger while resting hand on engine block clip has spark to my finger. Is there a ground problem? Why would this be happening. Note...

Up for Sale my NOS Mini Bike Dealer, Tecumseh (TAYLOR) Spark Arrestor and Muffler Display Box. It has Nine (9)NOS Tecumseh/Lauson Spark Arrestors. These can be attached directly to the engine, or attached to an extension pipe to suit your needs.This is a Red display box with 9 NOS (TAYLOR)...

I changed the points, condenser and the ignition coil. Why am I still getting such weak spark?

I know this has probably been brought up 100's of times, but what spark plug do you use in your Briggs 5hp flathead ? Heres what I'm starting out with. I also have a Autolite 411 coming in today.

I tried to start my 1977 hs50 and there's no spark. I removed the flywheel and cleaned the magneto and still nothing:( I'm not very familiar with a points setup, what should be my next step or what should I replace. Thanks.

The one that's in there says MM1 on it .. looks like a champion base. I can get my plug socket on it fine. I tried a taller J8C (Champion) and its too tall to get the plug socket on. What is the plug that belongs there? Thanks Kevin

Does anyone know how to set the timing on one of these? I have new points in it and I think I put it together right but there is no spark. Thanks

ok ij ust bough a light blue briggs. when I touch the top of the spark plug wire it gives my hand a very strong jolt. I could not get the motor to run so I pulled the plug out and saw that it was making no spark at all so I put a different plug that was on another briggs that was running 5...

$75 shipped located in Wilkes barre pa PayPal

I'm looking for an old AC or other brand spark plug cleaner machine. Condition is not that important but must be salvageable with most if not all parts present. Looking for something similar to the ones in the pics. Please PM me or e-me at <<**choppinit@hotmail.com**>> Thanks for looking.

1971 Tecumseh hs35 I got the spark aresstor decal with my decal kit but not sure about placement, any help would be great. Thanks

Traded a Bonanza frame for this motor and cash. It has no spark. #s look like 552508 ? What can I check first? Points? Are tune up kits available? Needs a carb also. I want to use it on my BC 1300. But that's in the future too many projects already !

Hello, I have an old B&S vertical shaft engine (3.5 horsepower) with no spark and a hundred PSI for compression. The model # appears to be 92902 1140 01 7606 1704 but I'm not certain this is the original pull starter. What usually knocks out the spark on these engines? I believe this...

For sale is a E model Powell spark arrester and muffler . Fits an HS 40 TEC motor . This setup came off my E model , was saving it but I like my Powell the way it is and have no need for it . The flange were the bracket bolts to that clamps the muffler on had been broke , and has been welded...

I have an HM80 that is on a VT8012. I cant get a spark / attached pics of the Mag and Coil assembly. Does anyone know how to test the Mag to make sure it is good? I am replacing the condenser as its cheap and I am in that far. Any other ideas of what to check? Thanks to all

Hey guys, What spark plug should I use? Should I get the same as original, or different one? Also what should I gap my plug to? Thanks :)

Hello, we are in need of a spark plug cap w/ the spring inside that attaches to the spark plug ?? These are made of brass and screw into the main cap.. All the Indian & Italjet mini's used the same parts and pieces. I know i can gerry rig it pretty easily, but we would like to find the...

I got a Montgomery wards tractor with three point and pro the way it sits its worth $600 but got it for $25. Hasn't started for 30 years and it wipped over fast but no spark. Could it be that one wire coming off the magneto? It's going to be work getting to it so I want to know. Both magnetos...

Autolite ar3910x OR NGK bp6es

I'm building a HF 212cc with 22 mm mikuni carb, header, removed oil sensor and govner just ordered fly wheel, con rod what lb 18? 22? valve spring should I run? What spark plug should I get what should I gap the plug at? Single electrode please.