sprockets

  1. N

    choosing the correct gear sprockets

    Hello, May I ask for help about choosing the correct gear sprockets for my Bonanza mini bike.The engine sprocket has 13 tooth connected to the jackshaft sprocket with 9 tooth sprocket.Then the right side jackshaft has a 18 tooth sprocket connect to the rear 60 tooth sprocket on the rear wheel.I...
  2. IJG

    bent rear sprockets

    Find new or used or repair? :shrug:
  3. leathernun666

    Jack shaft sprockets

    I need a #41 and a #35 chain 5/8 jackshaft sprockets 10 tooth preferably on the #41 and 11 on the #35 but will consider others. PM me:thumbsup:
  4. jmbmini

    Rupp 60 Tooth Sprocket

    Here is a 60 tooth sprocket that fit the 1969 Rupp models and the 1970 Rupp Sprints if you want to change to a 60 tooth over the stock 72 tooth. $45.00 shipped. Paypal and cash only. Lower 48 states only.
  5. manco12

    Baja/Puma Jackshaft with sprockets

    Hi, I have a Baja/Puma Jackshaft Assembly with sprockets for sale. The sprockets and bearings are included. The chain tensioner is not included. The pictures below are of the exact item that you will receive, however it will be shipped with the sprockets taken off to possibly save on...
  6. P

    Rupp Front Sprockets

    I'm making some headway on this '70 Rupp Roadster restoration, and it's time to make a few decisions. The original jackshaft is only keyed on one end (for the driver pulley), with the sprocket end held on with a roll pin. I'm thinking about getting a new jackshaft that's keyed on both ends...
  7. bornintheussr79

    Sprockets and seat

    Sprockets $15 each shipped or $45 for everything + actual shipping Seat $19 shipped
  8. W

    Unplated steel sprockets vs rust

    Anyone have a good idea for keeping unplated steel sprockets from rusting? Masking off the area where the chain would ride and painting them is the only thing I have come up with. Thanks Bill
  9. Clayon

    Lining up the sprockets on your minibike

    I was just wondering if anybody has any tricks that they use to line up the clutch sprocket, and the sprocket on the rear wheel? I've succuesfully lined up motors on my bikes before, but it is usually a task that takes lots of checking and double checking, these spinning the bell on the clutch...
  10. markus

    drum and sprockets

    I have some spare sprockets and a brake assy that I wont be needing. $30 plus $11 priority mail flat rate shipping for ALL 3.25 6 bolt spacing fits manco, artic cat, kidney bean bonanza, spinner bonanza, spinner azusa wheels. the smaller 3 bolt in the center of the brake drum hub (didn't...
  11. Timmahhhhh

    4 Inch Azusalite Wheels Question

    I am thinking of getting a pair of 4" Azusalite Wheels for a future project. What type of rear sprockets fit on wheels this size? Will a standard Azusa drum sprocket fit,or does it need some sort of adapter? I have two Azusa drum sprockets-a 72 and a 60 tooth. Both have the 3.75" bolt pattern...
  12. countstevula

    WTB: Manco Big Cat sprockets

    NEED the jackshaft sprocket, and probably the main sprocket also...
  13. snosnake

    Azusa sprockets

    I have a few of these NOS AZUSA aluminum sprockets. The center hole is 2.265. The bolt holes are 2 1/4 apart and are 3 inchs across from each other. I have 2 NOS with part number is T3212 38 and 1 used. 2 NOS with P.N. T3212 40 I would like 20 each for the nos Sprocket and 15.00...
  14. Mini420

    OldMiniBikes Sprockets

    Looking to maybe upgrade my rear sprocket on my doodle bug. Will the universal ones from OldMiniBikes work?? 60 Tooth, #35 Steel Plate Sprocket Thanks
  15. J

    Taco minibike rear sprockets NEW

    Scooterboy made these,I have no need for them now. $60 for both,plus $15 to ship. jw
  16. J

    Rear Sprockets for minis

    I'm not sure what these fit,but if you can use them,they have the description on them in regards to bolt patterns and hole diameters.Includes a 6 hole spacer made of aluminum. $20 + shipping. jw
  17. M

    Baja Sprockets

    I'm ordering a 36T sprocket for my baja. The catch is that the site I'm ordering from has a 50$ minimum. So if two+ other people wanted to get some in various sizes, 41 Chain - Weldasprocket on F.C. Mason I'd put in an order, drill them on a press, and ship 'em for 20$. Anyone interested?
  18. Newoldstock

    Sprockets Steel VS Alum

    Sprockets Steel VS Alum: Looking for some feedback from anyone with experience in this area. I found some 41 chain 58 tooth aluminum blanks for my 165 and the price is tempting. How long would that last on a mini?
  19. bigevilone2

    Bonanza kidney bean sprockets USED !

    Three Bonanza 6" kidney bean wheel/8" spinner sprockets. 60 tooth #35 chain. Two are usable and one is probably not usable (you decide). Want to sell all together. They have been sand blasted. Price is $50.00 for all three + $10.00 shipping Thanks Ed
  20. F

    Gearing??

    I am wondering what sprockets i should be using on my minibike for decent low end and decent top end speed..It has a jack shaft and i currently have a 12 tooth clutch..Facing the jack shaft from behind i have an 18 on the left and a 13 on the right the engine goes to the 18 tooth and a 40 tooth...
Top