tec

Been trying to determine the year of a Tecumseh engine I acquired recently and not having any luck. Here are the numbers. H25 25196H Serial 11830 Any help is greatly appreciated! Thanks.

Can anyone tell me a 100% correct answer on the shroud covers on both are they exactly the same

Well I've never seen this before but, The Thread end of my HS40 crank snapped off ! Clean, like ya cut it with a knife! Question is will a 3 or 3.5 Crank work as well OR is it a HS40 crank only thing? This is a lighted HS40 as well if that matters. Thanks

Attached is a picture of a block that is listed on Ebay. Notice what looks like cracks on the inside of the lower case? Would this be something of a red flag? OR, could they be just casting marks from when it was made. Has anyone noticed thses on any blocks you have rebuilt? OR could they be...

I found this 8hp Tecumseh on a Coleman generator. Will it work fairly easily if I want to put it on a Super Bronc?

Does anyone know what size engine this would of come on.

Looking for the 1 inch long throttle cable conduit with or without the spring. HS40 /HS35 Thanks Tom

Hey everybody, First 56yr old newbie question regarding flywheel key problem that I cannot figure out:anon.sml: I had a spark problem on my H30 that required me to pull the flywheel to investigate. I traced it to a cut condenser wire that I fixed, but when I put everything back together, I...

So even though this engine isn't and will probably never be on a minibike I still though you guys were the right people to ask. So recently got a used snowblower. With a 4HP Tec engine. The serial says HSSK 40. So far I have cleaned carb, replaced fuel lines, new fuel shutoff valve, attempted to...

Hi, I have not been around for a 1/2 year. But I finally put some paint on and re-upholstered the seat, new tires and a few do dads. I took some pictures to show it off. It is a Bird Duck, with 6 inch tires, scrub brake, 3.5 HP Tech. I just have to hook up kill button, route throttle, gas...

How in tarnation did That injun guy get different HP ratings from the same bore and stroke.:confused: I looked around the net and still am dumbfounded. Please enlighten me oh great ones?:anon.sml: Old ancient Mini-Bike proverb says..... Curiosity killed the cat, but satisfaction, brought...

Like it says up there. Intake for a 5hp flat head Briggs to be able to mount tec carb or tilly. Good shape comes with gasket. $35 shipped.

looking for someone to do a quick rebuild on an hs50, I would sent short block all cleaned, I will paint myself re ring it hone it lap valves, new seals gaskets, maybe cam, points timing anyone out there? I don't want to stick a ton in it, but I know everyones time is valuable

Hey All, I have this 10 hp Tecumseh with lighting. Now my question is, I would like to put a LED light on this. What is the Watt I should be after?? 8W ?? Anyone know what the engine puts out ? Thanks in advance, Cory

Does anyone have a couple of the spacers laying around that go onto the head bolt to support the top mounting bracket for the gas tank? For an H35. Thanks Tom

I am re-assembling my H35. I was not the one who disassembled the engine and while I believe I received all the parts sometimes things get misplaced. So, I am in need of help......again. Once I get past this step I will be much closer to addressing the cosmetics with paint etc. First...

My HS40 tank is yellowed. Cleaning helped to whiten a bit......but what works to restore the original whiteness or has anyone applied paint or something else when restoring their Tec tank? Thanks. Tom

I got this engine 5yrs ago and have never used it, it needs a carb or a kit, gas tank is gone, and it needs a patch on the blower housing where the chipper's tank bracket came loose. I had it running back then but it had carb issues so those who know Tec engines can fix it easily. Perfect for a...

I saw this on Ebay, but didn't look at all the pictures until a few minutes ago. I'm guessing the bidders might have done the same. I know it has a lighting coil/flywheel, and that 631588 diaphragm carb is worth a bit, but who pays that for a blown engine? That's at the top of it's value in my...

Looking for the short exhaust manifold, long exhaust pipe and the guard. System exists and runs on the left side of the bike, if that makes any difference relative to the 1300 with HS40 which runs down the right side I don't know. Thanks. Tom