Agk .290 Cam power range

[boogyman]

Got a question for you guys.I am trying to set my clutch up,and Still missing some info that I will need,I have a .290 cam from Agk (Isky) and the cam card did not state any power range info. Would Anyone might have the specs?

I am also running Parson's 1.12.1 rockers.:thumbsup:

 

[boogyman]

Agk .290 cam

AnyOne:shrug:

 

[novaracer]

power range i have no idea other than 7500+ i have never ran that cam i have ran only 3 different cams nr 252 0607 nr 274 marine :thumbsup: and a custom grind i did myself after a lobe went after running 26lb springs. i like the mid range and topend of the 252 but the grunt of the 274 is sick.

 

[minidragbike]

Depending on carb and head work from 7,500-8,500 is what you should be turning. That also depends on weight and gearing.

I also run that cam, great cam:thumbsup:

 

[wildman500]

I believe he wants to know when does it begin its power range. If he isn't, I'll ask. At what rpm does the cam start making its power? thx.

 

[minidragbike]

Should be from 4,000 RPM and up, maybe as low as 3,800.

 

[boogyman]

That is what I ment:wink: Sorry Been away from the laptop for a while.