I need help with my predator!!

[Jcthebomb11]

ok so I have a 212cc predator with a jet kit from OldMiniBikes warehouse and an air filter from studz.... and it is running terrible for some reason! the only thing I did was change those 2 things. When I go full throttle it feels like something is holding it back... like not enough air or something. Can someone please help??

 

[chipper]

do you have a header ??

 

[Jcthebomb11]

no should I??

 

[jdogg]

no should I??

Yes! You have introduced the engine to a lot of air with a new high flow filter and no way to get it out with stock exhaust!

 

[Jcthebomb11]

Ok thank u so much I will let u know how it goes!

 

[jdogg]

Ok thank u so much I will let u know how it goes!

Get on it Jc!! And please do report back!! :thumbsup:

 

[jdogg]

Start here Bro! Not sure which style Doodle Bug you have but this is a good start!!
Exhaust Systems

 

[cxbra]

You can also slowly bore out your stock jet on the predator so its smaller than the jets in your jet kit, but larger than stock. That will allow you to ride the bike until you get the exhaust pipe. My predator is bone stock, except for a bored out stock intake and a bored out jet. Once I get an exhaust/intake I will get the jet kit, but for now the bike runs perfectly. If you do decide to try and bore the stock jet, make sure to do it in small increments.