Kill switch wiring

[doug]

My Bonanza with a 212 clone came with a on/off toggle. It was broken so I got another to replace it. Not sure how to wire it. There’s only 2 wires, but I can’t get the engine turn off by playing with different connections. Help.

 

[OND]

You need to ground one wire to the frame or engine , the other wire will go to the coil ground wire coming off the engine .

 

[doug]

You need to ground one wire to the frame or engine , the other wire will go to the coil ground wire coming off the engine .

Thanks! I'll get her done tomorrow.

 

[Strigoi]

Just an FYI, the yellow wire is for the low oil sensor inside the engine. It's not really needed in a mini bike application. I always remove them first thing when installing the billet parts.