My clone is ready to fire

[David wulf]

This is my red clone got her finally done . Going to build a test stand tommorow and try to fire her .

 

[David wulf]

Some pics

 

[delray]

What bike is going on david ? Bonanza....

 

[manchester1]

What bike is going on david ?

Ditto.. Is this for a Rupp your looking for.

 

[David wulf]

Brian it's going on the rupp that I'am bringing to windber . But for windber the rupp will run Doug's predator . We are just testing the predator on my bike , it will eventually go on another rupp that I'am helping Doug build .

 

[David wulf]

Ditto.. Is this for a Rupp your looking for.

No Jesse wants a rupp now that me and Doug have one , so he's looking . But you know how he is its got to be a prefect example to start with .

 

[David wulf]

Today I got my red clone bolted on my rupp test mule and got it fired up . Just like expected she runs strong and pulls hard on the top .

 

[Full Throttle]

David, where did you get that intake adapter you got on this red engine ? I like !

 

[OND]

Hey David post up a run video when you can .

 

[David wulf]

David, where did you get that intake adapter you got on this red engine ? I like !

It was made using the manifold thar came with the carb and a curved section from a HM 100 tec manifold ,fitted and tig welded together .

 

[chipper]

Very nice , how about the Dyno sheets , :laugh:

 

[Gadget Man]

Looks great.
That's the final look I'm going for on my DB Hemi install.
I see you also removed the air shroud from the engine for a cleaner look. Any problems with that?
Also have any of you guys gone so far as to cut off the old gas tank mounting brackets to really clean up the looks?

Gadget Man

 

[David wulf]

Very nice , how about the Dyno sheets , :laugh:

No dyno sheets , don't need one cause I know my motor is 58 hp . I have more parts in mine than the 22.87 motor , so it's gotta be 58 hp .

 

[David wulf]

I've had this 24 mm mikuni flat slide sitting on the bench for awhile now it's my brother Jesse's . So today I thought I would try it on my motor . I had a manifold stub laying around so all I needed was a piece of 1 1/4 radiator hose with a 90 degree bend in it . The carb works good but I this I want to try some bigger jets .

 

[David wulf]

Carb pics