Who made this mini?

[Kybiker]

Any ideal? I was told that it was a rupp.
Got it for $60.

 

[BigBoyToys]

Looks like a Cat. 250X?

 

[derekbmn]

Its a JCpenneys small model. It was manufactured by Cat (HPE/Muskin)

 

[KB2ROCKET]

No its a Rupp they all are rupps

 

[OND]

I believe it is a JC Penny / Cat....:wink:

 

[Kybiker]

I believe it is a JC Penny / Cat....:wink:

Thanks, that is it.
The forks on mine from the neck down are bent in towards the frame.
Both forks are even.
Your appear to be straight?

 

[Kybiker]

 

[OND]

Your forks are bent...we call them high speed forks. You can straighten them with a little time and man power. Oh and not my bike .:no:..but one I borrowed from the gallery.

 

[BigBoyToys]

I'm learning!!

 

[buckeye]

Derek has a couple..:smile:

 

[Kybiker]

Okay everyone thanks for the help.
I already shoved a 212cc predator in it.
First problem is that the rear sprocket looks like a bicycle sprocket.
I can't find a sprocket that has a bore of 1 5/8.
Between 50 & 60 tooth.
Anybody help please.

 

[Tom S.]

...I can't find a sprocket...

Take a look here. OldMiniBikes has almost everything you'll ever need. Support the store that provides this site.

https://www.OldMiniBikes.com/Mini-Bike-Go-Kart-Parts/Sprockets/

 

[Kybiker]

Take a look here. OldMiniBikes has almost everything you'll ever need. Support the store that provides this site.

https://www.OldMiniBikes.com/Mini-Bike-Go-Kart-Parts/Sprockets/

I found this one with the correct size 1 5/8 bore & it looks like it will work but it says something about disc brakes & mine does not have them.
Anybody know if this will work?
https://www.OldMiniBikes.com/68t-sprocket-for-cat-mini-bikes-disc-brakes.html#product-details-tab-reviews

 

[derekbmn]

I found this one with the correct size 1 5/8 bore & it looks like it will work but it says something about disc brakes & mine does not have them.
Anybody know if this will work?
https://www.OldMiniBikes.com/68t-sprocket-for-cat-mini-bikes-disc-brakes.html#product-details-tab-reviews

Yes it will :thumbsup:

 

[thejoker]

Dam it I was going to have Andrew pick that up for me. I have the rear fender for it.

 

[capguncowboy]

Dam it I was going to have Andrew pick that up for me. I have the rear fender for it.

it was 4 hours from me.... drive and get your own damn bikes :laugh:

 

[Kybiker]

Dam it I was going to have Andrew pick that up for me. I have the rear fender for it.

Wana sell it?

 

[Kybiker]

Your forks are bent...we call them high speed forks. You can straighten them with a little time and man power. Oh and not my bike .:no:..but one I borrowed from the gallery.

I got the forks removed and stripped down.

Anybody got any advice on how to straighten them?
Torch and heat?

 

[chipper]

No heat needed , 20 ton shop press and some 2x4's !!

 

[capguncowboy]

I got the forks... stripped down.

:doah:

Man, that bike would have been the perfect candidate for vintage tecumseh and some love as a survivor