I had a t 100 in 1970 . tryed to get joe taco to build a replica no dice . Looked to buy one . Now I am going to build one from scratch , going the long way around the block less the cop with the lights on behind me. but need some help . Are the wheel hubs bigger than 6x4 inch bead to bead . were can I get the front springs . Is the front axel 5/8 and the back 3/4 inch or both 3/4 Dia. how long . How wide and long are the forks , The top , bottom . frame tubes also . space of top tubes to bottom tubes . The swing arm Width , length and height of and bolt . Motor plate size . my seat fit between the frame rails . the big indian head tires- the front a back look differant need to get that size right . I saw a seat at a site the looked good . A person said that they bought a bettor quality rear sprocket brake drum assembiy from Joe taco , even thow it isnt offered on the site ? .. A bigger chain size 430 also . 14 inch tires the web sites say . I will have to make a welding jig so messurments have to be accurate . I still remember the day summer 1969 or 70 in steens factory show room deciding to get the taco with the cool supention or the honda 50 with the stamped frame and folding bars , 15 minutes later TACO ! Thanks , and to all the dirt bikes that made the hill trails at the old san susana pass dry wash area north san franando valley LA .Calif.