10"

Need a 10" rear wheel with tire. Prefer as cheap as possible. Sprocket for #35 chain and whatever size brake drum.

wheels are straight and solid, tires have some dryrot but useable (original fox tires), sprocket is nice. $40 shipped for the pair

Here is another one of the herd that has to go. Another project bike but has a lot of good parts and is in decent shape. Missing the original seat, headlight, tail-light, etc. Rims are in good shape, gas tank is near perfect and gas cap is nice too. Grab handle is there as well. The front...

I have two 10" wheels for sale. Tires and sprocket are included. $25 plus shipping for all. HD

Looking for a reasonable priced, complete 10" spoke rear wheel assembly. Would prefer one with drum brake and sprocket as well. Can be from Fox, Arco, etc. Going on an Arco spoke bike. Does not need to be show quality but needs to run true, this is going on a rider that I sold a guy...

Hey guys, I have for sale a 10" steel Azusa wheel. This one is not plated, but is painted black, this is how it was ordered from Azusa. I have a Cheng shin DOT approved 4 ply tire on it as well. This wheels was used literally for 10 minutes or less. I put it on the bike, the motor was barely...

Looking for a seat for my ARCO Bushwacker. something in good shape thet will bolt to the frame with little to no modification and also 3.50-10" spoke wheels and or tires in good shape for the same bike. need front and rear wheels.

Need 10" five spoke 2.50x10" wheels need the front but will buy both.it goes on 1970s bird.

I don't know anything about this 10" wheel stuff. Tires are in good shape, no rot or cracking that I noticed. Wheels both have an area that the chrome is bubbling. The one hub says YUAN-TA on it. One brake shoe is missing the lining.. I know I need to post a price so how about.... Wheel w/...

I need to find a 10" five spoke wheel for my thunderbird mini bike.Thanks

Front and rear off a Sears Puddle Jumper. Pretty sure they will fit other bikes, I have no desire to find a project to use them on. I'll have to count the teeth on the sprocket this evening. Brake is functional. $20 for the pair plus actual shipping.

I have rims, I Have the hubs. I just need spokes to lace the wheels. I believe the wheels for a 72 prowler is the same as a 72 ramrod. So I would buy a full set of wheels from either model. Also. I have seen Gemini and Rupp 10" wheels, and they look very similar, but not exactly...

Picked up an early Manco Thunderbird Mini Bike this weekend and it has the old 10" x 2.5" wheel wheels with the large slots wheels. Any idea what year thay stopepd using the 10" Wheels and went to the 8" I'm trying to estimate the year on this thing and so far no luck.

I'm looking for a pair of original "Bonanza" BC rear shocks in good looking and good working condition. need to be 10'' eye to eye with all rubber eyelets and bushings , I believe the eyelets are 3/8 dia. Looking for a reasonable deal. let me know what you got. thanx.

10" 28 Spoked Wheels..... with brake assembly and a 54t sprocket for the rear wheel. These wheels were used on a couple of different bikes. $150 shipped... The sprocket is not pictured, but is included. It is brand new.

Found these stashed away in the garage, forgot I had them. 10" spoke wheels NOS complete with brakes/sprocket/axles. These are correct on some of the MTD's, Simplex, Herters, and alot of other spoke wheel bikes. they are really nice, still have grease coating on them, no rust. Never been...

Have not been here for a while Im looking for cheap wheel bearings to fit the 10 inch wheels of a speedway shrike. They are about 1.375 OD .625 ID .427 thick with the Groove for clip any good sources Please. Local bearing place wants 100.00 for 4 .I sure would think there should be some place...

Need a 10 inch spoke wheel for a Gilson 525 mini bike , this is a band brake wheel . I have the band hub and sprocket , just need the wheel . Some one welded three 1" x 3/8s flat steel to the rim and bolted it to the hub when the spokes broke , not a good idea . Let me know if you want to sell...

asking $100 shipped wheels are in great shape, comes with drum brake with very little use and 72 tooth sprocket, and your choice of tires, street or dirt which both sets have been raced a few times. and oh yeah also comes with an extra $60 tooth sprocket. the wheels had came off of this bike.

There is a pair of 1972 Rupp 10" wheels on Ebay I'm interested in. Problem is they use 1/2" axles and the bike I want to use them on uses 5/8" bolts. Can the bearings in the hubs be changed out from 1/2" to 5/8"? If so are they the standard 1 3/8" OD bearings sold all over Ebay?