brake

working on a 1961 short frame Caper roadrunner/falcon, Tyring to figure out what prevents the brake plate from rotating. Looks like in the brochure that the brake arm almost rests against the top of the axle mount? In various pictures of actual bikes online though the arm is in different...

I am looking for some replacement brake levers for this Super Bronc. I am tired of fighting what I think is a battle that cant be won. I need a lever with an adjuster on it. I just can not find a happy medium on this Super Bronc. Either they drag and lock or they don't work. I measured the...

stock doodlebug sprocket 25$ shipped stock doodlebug mechanical brake 20$ shipped random tilly - 10$ shipped

Wanted Victor brake drum assembly. This drum assembly is used with an ASTRO or tabloc 5 spoke wheel assembly. These were typically used on the Barris bikes and others. It should be three pieces includes a wheel adapter, a 4.25 inch cup and the brake housing holding the brake pads and arm...

I know there are front brake kits for doodlebugs because I had one before... I think it was called ProMod front brake kit or something.. can't find them online.. anyone know what I'm talking about? I had them on my old mini forgot how I came across them, but they look like this...

I'm going to replace my brake lever and cable assembly. I need a cable housing about 50" long. All I'm finding are longer, with each end having metal cap. Can I cut off the end down at the wheel to the length I need ? It looks like it goes into a socket and would be immobilized and covered.

Max Torque 3/4", 12 tooth, #35 chain.....$15 Multi disc clutch, 3/4", 15 tooth, #35 chain.....$45 Nelson Muffler (Herters Style), couple small dings.....$75 7/8" Brake handle, accepts large barrel end cables.....$15 Plus shipping on all items. Cash or PayPal as a friend or include the fees...

I hate to start a new thread over something that just have been discussed a zillion times here, but after a few search attempts I didn't find what I was looking for. I've got 2 minis that are in need of brake levers and cables. My Trailjet has plastic levers and crappy cables, and the brakes...

I have a DB30s (Metal fenders) that I just picked up and the brake caliper and brake cable were messed up. I got a cable and caliper off a person on here and the barrel end that goes in the brake lever is smaller then the original barrel. He said he took it off of a DB30s just like the one I...

So I was wondering if I had an old vw pressure switch and I have a dual element tail light , would that give me a brake light? Someone who knows anything about this would be delightful . Thnx in advance kenny

but not just any brake lever, i have headlight, now i have a tail light but the light i installed is a tail/brake led light, im looking for a brake lever with the brake light switch any ideas

Any body have a solution for a frayed cable end????? The rear brake on my Bronc is frayed and I can finagle it though the first pin with its smooth hole. BUT I cant get it to go though completely on the rear pin as it has a cross screw to tighten down to retain it. So it hangs up on the edge of...

Hey Guys, We are having issues with the clearance with the brake caliper clearance on this build. We bought the Gigantic Kit from Bad Dog, so it included the caliper and everything but now once we have gotten everything close to assembled we are finding issues. Hoping that some folks in...

any one have a 4" approx disk for a 5/8" or 3/4" jackshaft mounted mechanical disk brake or where to get or make one? thanks

Need a brake light switch for a 1968 Rupp Disk brake bike. Thanks for looking! joel

I need two Rupp brake light switches for disk brakes. Is there an alternate source? There are two on each rear brake assembly. Part # 12984 and 12985 ( #82 and 82A in diagram) 1968 Rupp Minibike Part # Catalog Thanks for any help and suggestions! For the engineers - How do these work?? :)...

Ok, who is the band brake expert??? And to make matters worse the band brake is on my Super Bronc. So it really is an odd configuration. I took it all apart today and tried to sort it out. It will not stay square to the drum. It was twisted at the top as the 2 eyes were not parallel. I put it...

As some of you may know, I'm working on my Fox Sprite mini bike for the 2017 OldMiniBikes Build off. Anyway, I've run into a little snag. The rear brake pads have separated from the shoes due to rust. I'm curious if you guys know where I cold get new ones or how I can reattach the old ones. Thanks!

I'm in need of a Limtco brake drum plate or assembly to complete the wheels for my Stellar Black Beauty. If anyone can help I'd really appreciate it. Cash or trade (if I have something you need). Please PM if you have something. Thank you. A.J.

A Friend & I are interested in upgrading parts ' Anyone install a Willwood brake caliper setup on their (minibike)? Bolt right on, or did you need a special brackets? show pics please Both front & back would be sweet.