Pulled these off working lawn edgers 30 years ago, and been sitting in the shed.
I realize I have a hoarding problem with Tecumseh, and this is the first step to
getting more needed parts, (thought I was gonna say recovery? ha, your so funny):
Their gonna need a going thru but nice cheap...
Was at my local Orchard Supply Hardware today to just get some bolts for my build off bike and ended up buying way too much!! Couldn't pass up the awesome deals!!
5 1/2'' trim saw, reciprocating saw, drill, flashlight, two lithium ion 19.2 batteries and charger NIB for $50...
Doesn't this motor look like the PTO is on the other side? Unless they mounted the carb in front? This just struck me as odd when I looked at it. Did Tecumseh make any like that? The writing on the decal on the shoot is not reversed so its not the pic.
For sale is an all original Craftsman snow blower engine that runs exceptional. I've cross referenced the part# and it is an H35 with cast iron liner. Snow blower has been in storage for 20 yrs. Compression is very good but I will test it and record the results as soon as I have a chance. I...
I have a Tecumseh that I got on a Manco bike.
It has a Sears Craftsman type number on the tin: 143.774012 SER .6227B I believe.
Of course I looked in the "3 to 11hp L-head Technicians manual" in the back, but 143.774012 wasn't listed. The closest numbers are:
143.774022 H30-35342S...
This is a beast from Hell! Not for the squemish. Please go back to the forum while you can.
Pulled this off an overpowered retro lil mini bike back in the 90's.
Powers up, but needs a carb and the usual goin over.
Compression will kick you back into the last Windber ride......Twice.
Starts...
This is a complete original CRAFTSMAN 3HP Side Popper engine untouched
Everything is original and intact
Model # 143-571052
Serial # 717902170
Great compression and Spark Nice Clean 5/8" keyed shaft 2 1/4" long
Should run with a little
$50 Plus Shipping TLC
As usual cant get pics to load...
Need some help on this motor.Just picked up a taco 22 Frame Serial # 7P1852
The guy that owned it has had it over 40 years he said this engine has always been on it.
I need some info on the Engine
Craftsman
Serial# 7179 02170
Model 143 571052
I cant get pics to load
Picked two new engInes up over the weekend.
HS50 and a yet to be id'ed Craftsman Tecumseh. Both have great sounding compression and shock my hand good.
,,
Also found this cool Kutchmans shroud. Definitely throwing this on something as is. Pretty popular local minibike store. I'm...
I struck a deal with a neighbor that I help out from time to time. He removed it from some piece of equipment in the early 1980's, stuck it on a shelf and there it sat. When I got it home I soaked the cylinder and throttle linkages and it turned over slowly, might need to be rebuilt. I think it...
So I got a Craftsman 7 Gallon 135 PSI horizontal tank for xmas yesterday and I'm trying to determine what I can do with it so I can buy attachments. I'm thinking it'll be good for painting but would this size actually be good for air rachets and sand blasting?
Thanks
O.K., I checked every PDF on the web after I checked our OldMiniBikes Bible here and the insanity leaves me no option than to admit that I was dating Casey Anthony when I encountered Trayvon Martin.
For the benefit of those that just tuned in, I have a Craftsman horizontal that is not listed on any of...
i got this 1977 craftsman push mower and need some replacement parts but nobody has them. small engine shops dont carry them, and sears parts direct dont have much. i need a control actuator and carb rebuild kitt, anyone know of a good source for parts?:shrug:
I was going to put it on a Kart for my kids, but figured I'd see if it tickled any one's fancy, before. It fires up, has good compression. Worth any thing?
Motor# 143744022 SER 4068B and carb is 1428K2E
2-1/2 bore, guessing 3-1/3HP? Year...
This link is for a description only.
http://www.amazon.com/Craftsman-309-Piece-Mechanics-Tool-41309/dp/B007DGRUS4
Bought these from another OldMiniBikes member, planned on keeping them. But I need to sell them. This set is unopened and new still in box. Perfect for working on any minibike.
Asking...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.