forks

Mine are twisted and broke.

Looking for a set of forks for a Sidekick. Thanks

Looking for forks as someone went wild with rebar on these ones lol... Also a jackshaft bracket for a Boonie as well as it's currently running direct... Please PM me with what you have... Many Thanks !!!

Finally getting to tearing apart my murray to repaint, how do i remove the front forks? Seems like the pivot tube was welded in durning assembly. Wanting to take it to the blaster to have it stripped. Also looking for a source for some parts to it, needing the upper fork nut for starters...

looking for mickey forks

I'm looking for MTD/Columbia forks with the internal springs. Thanks

Looking for a GOOD front fork for my Wards T555. Must be straight with no bends or welds. Will pay top $$$$ . Email photos to fredski53@gmail.com:laugh:

Any one know what these are from ? Thanks Brendan

I'm looking for the forks and handle bars to a 68 or 69 lil Indian outlaw chopper. I have a 1970 front end for the outlaw chopper that I can trade or cash!

Reproduction 1970 and 1971 Speedway forks. Exact in every way! Stamped metal just like the original ones. I have them in bare metal, flash chromed or show chrome. Don't try to fix your twisted, rusted broken original ones... i have them with or without the headlight/number plate ears. I only...

$500

I'm looking for some advice on straightening bent Cat forks and handlebars. Anyone tackle this before, and if so what worked for you?

Good and straight frame. Fork bolt hole is egged some but can be fixed. PO put a piece of pipe in right side foot peg but they didn't weld it so it can be pulled out. Has original scrub brake and spring. I have the wheels and can make a deal if buyer wants them. Also will throw in the seat that...

I'm fabricating a set of forks. I had the trees laser cut and was under the assumption that all Lil Indian trees were the same? During the process I noticed that one set I have is a little larger but with the same spread? Thanks in advance, Rich

Has anyone tried to mount up a set of Azusa mini bike front forks on a Baja DB 30? They look exactly the same but maybe not quite as wide as the DB 30 forks. Thanks.

Ruttman handlebars for a goose 6" wheel bike the one top left side (sitting on the bike) is tweeked ahead just alittle not bad just thought I'd mention it. $120 plus the ride. Operators are standing by!!! PayPal is fine send as a friend or pay the fees. Thanks

Bonanza front peg BC1000 frame and forks. I'm trying to duplicate my first Bonanza I bought in 1963. The parts can be rusty crusty as I need them for patterns. Marv W in Bonny Doon Ca.

Like the tittle says I am looking for a set of MB - 11 front forks with suspension. Complete with bars or just the forks would be fine. Let me know what you have. Thanks, FOMOGO

Like these,I'm in Colorado. Joel http://www.oldminibikes.com/forum/photopost/data/564/medium/bird_2_3.jpg

I have a straight VT8 frame and forks with handlebars and the bracket for the rear of seat and a rough but restorable front fender. Also 3 footpegs. I have no other parts, wheels and axles were sold long ago. Will not sell anything separately just yet so please do not ask. $200 plus shipping, I...