help!

My three year old son flushed his Pull up down the toilet up stairs in the master bath our shower is now backed up and the kids bathroom down the hall the shower is backed up but there toilet still flushed I own a large snake about 150' my father said go through the vent this is my problem his...

:shrug: I am new here, I really need some help, no not that kind !!!! Anyway bought this Raptor can't find where the model or I.D. numbers are on this motor. It is a 5hp, I'm sure of that, Not sure of year it was made. The only thing I can tell you is the decal on the fan shroud Says " Briggs...

Still looking for parts and photos for MTD trail Flite.

Hello all I just scored a nice older DB the kind with the flat seat. I need more torque, it won't climb even slight hills. I don't want to spend a lot of money for an adapter plate or jack shaft. I'm looking for a larger rear sprocket. I'm willing to re drill the mounting holes etc. Does anyone...

I have two hs50s that I run on my twin engine go kart. I decided to take them both apart and clean them up and upgrade them some. The first engine came apart no problem, but on the second engine I cant get the side cover off. It comes out about a 1/4" and stops. When it moves the crank moves...

I got my 5hp Industrial Plus 133432 running today. Runs great! But, I can't figure out the governed idle. Its too high and my clutch is engaging making the bike roll away. I did the static governor adjustment, idle mixture adjustment, and its still too high (1750-1800 rpm.) there is no governed...

i had an old mid to late 90s jr dragster laying around the house and it had a tav on it and my step dad and i put it on my MB200 its super awesome ran great 2 weeks started it today to ride and go ride my practice track ride it for 10 mins then i shut it off to get a drink of water and then i...

I'm assuming its vintage of some sort, I cant find any specific markings. help me identify it?:thumbsup:

The pictures are coming soon but please help

Everything is as it should be but it just wont start! Pulled the plug and it sparks nice and strong about once every 15 pulls. maybe a bad plug but I hooked an allen wrench into the plug cap and held it against the head and it does the same thing, Anybody have any ideas? :shrug:

Looking for something to put on the front, taller skinnier tire/rim combo to give it more of a chopper/ bobber look. I have a good wide one to put on the back. Thanks

Hello everyone (Reading this thread :smile:) Anybody wanna "Donate" a pair of Rupp foot pegs for my wifeys Rupp Continental for Windber.......!!?? I'd pay the shipping!! Any help would be greatly appreciated :thumbsup:

Hello everyone (Reading this thread :smile:) I am in need of a pair of Rupp foot pegs for my wifeys purple Rupp Continental for Windber....... FREE WOULD BE GREAT! :wink: I'd pay the shipping!! Any help would be greatly appreciated :thumbsup:

Hello, I just picked up a Coleman 5.30 survivor and I want to change out the oil since it hasn't been run for about 20 years, maybe more. It did not come with a manual of any kind. I ordered a parts manual for the bike and that should arrive sometime late next week. In the meantime, I would like...

Ok so I'm ready to oready some new parts from OldMiniBikes one being air firer kit. I've never done this mod my self. I see there are 2 kits for 212 I see jets and e tube. Which kit should I get (kandn), what size jet, and what's a e tube?

Hey Guys, I just got this mini bike from a friend of mines and I am having a hard time trying to identify it.I thought it was a Lil Indian but I can't find any serial numbers on the frame. I was hoping some one could identify it Thanks

Looking for honest knowledge opinions or advice... I have a 81' Honda Odyssey FL250. New it called for a 20-1 ratio mix. I bought a liter of Maxima Premium2 two stroke oil for premix. My first batch of gas I used 91 octane and mixed it 20-1 because thats what it says on tank and in...

Hello I'm new to this. last year I picked up a mini bike and I got it running "okay" I was told it was a broncco tx-1 the motor just keeps giving me issues I was wanting to put a 5 hp on it but I guess I have to get a jack shaft then? The motor that is on it now is mounted all the way over...

bought this motor at a swap meet friday but can't find any info about it on the net. can someone help?

I need to know what kind of converter this is. And it's it able to be fixed. I bought a 212cc ohv engine tonight. Need to figure out clutch so I can ride this thing. That engine should do good on this trike. Thanks Ken