jet

  1. L

    Any idea what mikuni pilot jet this is

    Any idea what mikuni pilot jet this is? It's a #60 pilot jet in a carb I ordered and I need a #30. Its from a vm26 genuine mikuni but im not sure if its a 26-606 or a 26-8074 mikuni and if that would make a difference. Apparently at tboltusa their genuine vm26 pilot jets won't be compatible with...
  2. bikebudy

    Terra Jet Engine parts

    Don't know if anyone is looking for but, I found this in our Canadian Adds terra jet tecumseh 4 cycle engine vintage snowmobile | snowmobiles parts, trailers, accessories | Peterborough | Kijiji
  3. hdrolling

    Pedator 212 gas leak after jet change???

    So I added an OldMiniBikes stage one kit to my Predator 212 (exhaust, intake and re-jet). After I changed out the jet I can't get the fuel to stop leaking from the egg shell cover on the float. Any suggestions? The round gasket is still there and the bolt only tightens so much, could it be I...
  4. H

    Briggs pulsa jet on vintage mini bikes

    Have been holding on to these cause I thought I might find a needy mini bike. Anyone know what vintage bikes actually used these pulsa jet Briggs? A purist might say none...given the color, exhaust..etc...but I just mean type engine with the pulsajet. I'm guessing the black one (3hp) is...
  5. old shed finds

    Briggs 3-5 HP Updraft Carb Fuel Bowl Needle Jet leak.

    Hello Guys.. Anybody fight the briggs 3-5 HP Updraft Fuel Bowl flooding? Horizontal Tote Gote 5 HP Engine, The Float was tested Hours under Gas to check for leak and passed ,,, We think it Is leaking at our needle valve fitting gasket.Anybody else have this problem?
  6. B

    OldMiniBikes jet kit

    hi guys, I installed the OldMiniBikes jet kit in my 212 predator, but it was way to rich, I tried both jets, so I put the emulsion tube from the kit and my orig. jet and it seems to run good now. the jets are not marked for size. is this kit for modified engines? I was trying to stop mid range surging.
  7. CJdoodlebug90

    Mikuni carb pilot and main jet adjustment

    Ok so i have a mild built 212cc. Installed a 26mm mikuni with 130 main jet and 12.5 pilot. Ive kind of been going in circles with trying to tune it. What is a good needle setting and mixture screw setting to start with? Ive got it to run decent but it boggs after free rev and sonetimes backfires...
  8. CJdoodlebug90

    26mm mikuni help

    Ok so I had a inyake made for my mikuni and found out engine port on the intake flange bolt holes were too big.so I modified it to work. Hooked it up and found out I had a gas leak so I doubled up the gaskets and that solved it. I got it to idle and free rec good but when I sit on it and give it...
  9. doodlebug6.5

    Idle jet set up tips?

    Low Speed Jet Bored (.022) With O-rings I am planning to buy this idle jet for a richer idle and better performance in the mid range. Anyone mess with theses? Is it worth it? Thanks
  10. delray

    clone motor jet kit

    when buying a jet kit for a stock clone carb and it comes with a .36 and .37 jet and a emulsion tube. what is the big differents in the stock emuslsion tube from the one that comes with the jet kit.
  11. Not so mini bike

    Briggs flow jet carbs and gas tank

    Red carb was on a 5hp green was on a 3hp. Engine ran with red one green one I bought and never used. $35 shipped for both and extra parts. Gas tank was on a 3hp Briggs. Super clean inside $25 shipped
  12. Danny01

    79cc Predator Jet Size?

    Any one know what size jet the 79cc Predator comes with. Need a bigger one. Please help me I need it!
  13. T

    Predator 212cc carburetor woes

    I have a non-hemi Predator 212cc on an old manco quicksilver go-kart chassis, it's been in my dad's shed since 2012 or '13, can't remember. The reason being a worn jackshaft sprocket and a driver unit that stuck open and wore belts out in a matter of hours, and no time to mess with it back then...
  14. F

    Trail Jet by Minico

    _________Original message__________ I would like to find one of those TrailJets by Minico. I had a blue one and my best friend had a red one. Parents bought them for us the same day and I ran mine until the rod came out the front of the motor. Somewhere in the 3-4000 mile range easy in a...
  15. P

    Cool for a collectors showroom ital jet coin operated

    http://pages.ebay.com/link/?nav=item.view&alt=web&id=261961784874 I stumbled across this bike on eBay . It's under toy motorcycle ital jet from what looks to be late 60s . I can't post pic but I posted item number guy is from ny . Also it's a coin operated bike that would be killer for showroom!
  16. CJdoodlebug90

    Car leaks after jet install!!!!!

    I was running .028 size jet and noticed i had bad throttle reaponse. So I ins5alled a .032 jet....runs perfect but now carb leaks. It seems like its coming from the top of the bowl. I made sure I put rubber seal back in... I need help. Upgrades: dyno cam. 18lbs springs. Header. Air filter(no...
  17. dylanc4941

    Air Filter and Jet Upgrade Question

    Hey all, I just ordered a Filter kit and jet kit with the 140 emulsion tube and the two jets from OldMiniBikes for my Predator 212. My question is, I am trying to keep the stock exhaust on. I currently ride around my neighborhood so I'd rather not upset any neighbors. So will I have to get a header to...
  18. Old scoot

    Predator after market jets

    I ordered the emulsion tube and the two jets from OldMiniBikes. One jet is a 36 and the other is a 37...question is: how to identify each one...or tell them apart ? Thanks
  19. 125ccCrazy

    new comet tav2 and new round gas tanks..Mikuni

    new Comet tav2, all new, no cover... new backing plate, new clutches, new belt etc... $125 plus ship New round gas tanks, 3 1/4 x 7 1/2 $42 shipped each Horstman billet intake with a true vm 22mm Mikuni with adjustable main jet (dial a jet), carb had gas in it one time for maybe 5...
  20. S

    largest emulsion tube causing bogging down, how can I fix?

    I installed a predator 212 on a go kart project I'm working on and I got a stage one upgrade kit which includes 36 & 37 jets and a larger emulsion tube, when I installed the air filter kit it was so lean it wouldn't start so i swapped in the 36 jet and it ran good, then I swapped in the larger...
Top