lift

  1. DeadPixel

    More lift from stock rockers?

    Can any one send me a link to a wright up on modifying the stock rocker arms for more lift. I searched quiet a bit last night and did not find anything. I know the kart racers do this some times to stay in spec. I already have a set of champions for my race motor and am going to be getting a set...
  2. 125ccCrazy

    Trade Briggs 5hp 325/330 lift cam for smaller cam

    Looking for a smaller lift cam for a build, somewhere between 250 and 290 lift...
  3. xBrent92

    Predator 212 Hemi: How much lift until Block Clearancing?

    i am just curious 'cause i'm looking at custom cam sizes. Now what i specifically am looking at are 104 LSA which is what i want...tons of torque. And the custom lift gets crazy high up. Like .400" lift high up which i believe would take Heavy Duty dual springs and new retainers and possibly...
  4. D

    Predator 212 valvetrain question.

    Hey guys, I'm building a Predator 212 for a minibike. I'm going to be running 14cc heads, flat top piston with .020" lower compression height, and a billet rod that's .020" longer to account for the lowered compression height. I plan on running 1.3:1 ratio rocker arms and I was wondering what...
  5. Sixpac440

    Harbor Freight Motorcycle/Mini Bike lift ... Review ... ish ...

    I have had this since last year and it is very handy. I wont lift any corner of my Caddilac DeVille to change a tire. And it's sketchy at best when trying to lift my Goldwing but I'll be damned if it isn't perfect for getting a mini up in the air for maintenance! I have a short shop stool...
  6. braaaaap

    Looking for Honda Clone cams with lots of lift

    Looking for options for cams that have a lot of lift, specifically around .400 lift. Highest I can find is .308 lift. Please let me know if you guys know of any options I may have.
  7. Sixpac440

    Bike Lift .. my new favorite toy!

    Lifts the VT-10 with ease. Granddaughter Approved too! Works on my Hilltoppers too!
  8. PhilosoRaptor

    Raptor 2 Build, second time around

    Hello everyone, Last time I built up my Raptor 2 I didn’t make any sort of thread or mention of it until it was long since complete and running, see the long overdue mention here http://www.oldminibikes.com/forum/more-than-two-wheels-/113893-homemade-kart-belated-intro.html#post954602 The...
  9. David wulf

    1.3 ratio rocker ?????

    I'am building a hemi predator with RTC 6 head , it's getting a dyno 308 cam . With this cam and rockers what would my lift be . I have no idea how to figure it out . Next ?? Will this be too much lift for this set up ? Next ?? I'am also building a red clone with a black mamba and champion...
  10. D

    Briggs limited cams

    1 .315 lift cast lightened weld up camshaft. It is a dyno. $75 shipped. 1 Robinson .400 lift billet steel cam and gear. $100 shipped.
  11. dw1973

    48 Willys Truck

    Traded for this recently. 1948 flathead 4cyl 4x4 3spd on the column with hand crank lift bed. Fun little truck. Looking for some parts if anyone has parts to sell.
  12. 125ccCrazy

    Dyno Tecumseh hs50? performance cam

    looks to be an hs50, ohh55, ohh60 Dyno cam...Not a big lift cam but should be an improvement over stock... Tecumseh Dyno Cams Go Kart Racing | eBay
  13. markus

    Will trade for a mini bike

    I know there are some classic van lovers here, and I'm sure some classic southern rock as well :laugh: so trade em' for this sweet ride!!! was converted to a wheelchair lift in the back so someone down the line was literally "flirtin' with disaster".....and lost :crying: molly hatchett van
  14. Sunset5523

    What's the diffrence from 4 hp and 3.5 Briggs flathead?

    Is the 4 hp bigger in size is the cam the same size as a 3.5 is the bore also the same size? Pls lmk Ty. Also anyone know the lift of a zoomer cam zx-7 and rpms?
  15. DPMC2

    HF Lift with 25 " stroke....

    Check this one @ HF... Sale W/Coupon $79.99 http://www.harborfreight.com/high-lift-riding-mower-atv-jack-61523.html http://www.harborfreight.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/image_23680.jpg Would be an easy mod to hold a bike. I am going to get...
  16. W

    Harbor Freight cycle lift

    A week ago I broke down and bought a HF cycle lift. Figured if I was going to have several minis I needed to be able to work on them standing up. Did some maintenance on the Tote Gote today and having that lift made a world of difference compared to sitting on a stool and having to get up and...
  17. M

    Wtb briggs 5hp high lift head

    I'm in need of a head that's clearanced for a .367 cam. Willing to pay up to $40.
  18. R

    How much lift before clearancing block?

    Like the title, how big can you go in a gx200 before the cam will hit the block? I want to keep my 1.3 rockers and stuff the biggest cam possible in there without cutting the block. I figure this will let me run high lift and good duration.
  19. FirePowerMinis

    High lift, low pressure springs?

    I plan to run 1.3 rockers on a stock clone cam for a hi-torque/lo-rev build. What springs will take .290-ish lift and not wipe out a stock lobe? I guess I can have the cam MicroBlue'd and run 26lb, but want out cheap :)
  20. vwmopar

    max cam lift and duration?

    I'm building a Honda gx390 clone. It's the 90mm bore with a Honda crank. I have yet to purchase a rod and piston. I'm am curious as to how much lift and duration is too much? I haven't been working on this project for a while now. Need to scrape up some bananas to have minidragbike build my...
Top