mounts

  1. gwoods27

    WTB - Trail Horse Rear Wheel sprocket and band brake drum mounts

    Looking for a Trail Horse 6” Rear Wheel (5 spoke) with both the sprocket and drum for band bake or even just the sprocket and band brake drum mounts
  2. er1k5

    Looking for Bonanza MX handle bar mounts

    I’m looking for a pair of Bonanza MX, SH handle bar mounts.
  3. FOMOGO

    Go Kart angled motor mounts

    I am looking at motor mounts and see on BMI that there are several different angles from 0 to 15 degrees. What is the purpose of the different angles? What does angling the motor accomplish? There has to be a technical reason for this. I would like to understand the theory behind it. Thanks...
  4. Ajf

    70 71 Speedway forks with headlights mounts.

    Looking for a nice set of 70 or 71 speedway forks with the headlight mounts. Pm or email Aaronfriedl@yahoo.com Thanks.
  5. flattire

    Bonanza engine mounts

    Is anyone repoping the bottom engine mounting plate for the bonanza ? Thnak you Brendan
  6. CLH

    Tote Gote Nova Rubber Mounts, Decals

    Hello OldMiniBikes members, I am looking for 2 sets of the LORD Rubber sandwich mounts used on the 670 and 675 Tote Gote Novas. I own a 670 (under restoration) and a 675 (operable) both need a set of new mounts because the old are worn-out and ancient. I know several have replaced their mounts...
  7. Ajf

    Footpeg mounts scrap speedway frame

    Does anyone have a scrap speedway frame that they could spare the footpeg mounts from? Thanks
  8. M

    Tecumseh 7 hp w/ starter mounts

    Looking for a working 7 hp Tecumseh with starter or starter mounts at minimum. Going on a healed VT7 and trying to stay close to original. Thanks
  9. T

    WTB Coleman /Attex Sport 2.40 handle bar mounts need a pair.

    Looking for pair of handlebar mounts. Please help.
  10. CarPlayLB

    Nova fork axle mounts

    The Nova fork mounts are in good shape and ready to screw on to the forks! Threads are solid and should clean up easily. These are $15.00 with FREE shipping (lower 48 only) thank you and Happy Holidays!
  11. Ding Ding

    1971+ Rupp handlebar mounts

    Like the title says, I am looking for a pair of 1971+ Rupp handlebar mounts that have the sleeve on the inside of the U bolt. Anybody have a set they want to part with? Look like this.... Thanks Mike
  12. markus

    Tecumseh plastic tank trade

    I am currently redoing an HS50 to sell and am kinda wanting to do it in white. Was going to do silver or black but the last few have been those colors so I wanna switch it up. I need a clean plastic one, side fill-I have the same in black (and a nice black center fill too if you needed that...
  13. Melman109

    Bonanza Chopper Forks and tank

    Looking for a set of clean forks and an original tank that mounts to the frame
  14. bikerboybenny8

    Bonanza mini bike

    Still got my Bonanza for sale. No forks just frame and swingarm. Mid frame mount footpegs. One of the mounts is gone. 100 bucks obo text me for pictures. 8147903952
  15. J

    Engine for Hawg Ty mini bike

    Is the GX200 clone from Monster Scooter Parts a direct fit to the Hawg Ty mini bike? I mean the engine mounts to the existing engine plate without modification and the clutch plate mounts to the 4 bolt holes around the engine shaft without modification? The listing does not list the bolt...
  16. B

    Gemini SST 80

    I'm looking for a Ignition switch that mounts in the side cover in good condition.
  17. lostinbaja

    Tecumseh 8-10 hp parts needed.

    I need the governor linkage rods and throttle linkage that mounts to the shroud. Let me know what you have. Thanks, Jerry...
  18. JohnnyTillotson

    Air filter nipples

    Found a box of these and need the flange that mounts on the carb that you install them on.
  19. Not so mini bike

    Bonanza bc 1100.

    I have the frame, forks, wheels, sprocket, brake and clutch cover Frame is good and straight. The only issue is the foot peg mounts are smashed over. I have a set of foot pegs just need the mounts. It is pretty much stripped down. Forks are internal spring. Good and straight. Brand new springs...
  20. J

    Motor mounts

    Will a 212 hemi predator have the same motor mounts as a6.5 clone
Top