pieces

If anyone has an old bonanza bc1100 1200 1300 seat cover they're not using I'm looking for some pieces of vinyl from an original seat to repair mine. Let me know what you have. Thanks.

I have three Tecumseh air filter canisters for sale. All three have both pieces (found a back plate for the white one after I took the pictures). Black and red canisters have both sets of the original mounting screws, white one has only one screw holding the two pieces together. Notice the...

Any help or information to catch these low life pieces of sh!t will be appreciated. https://www.facebook.com/groups/ThunderdomeRacersCup/permalink/570403463098783/

Doing my best to figure out how to put a torque converter on an old Alexander Reynolds . It's interfering with the scrub break. Had some aluminum pieces made for it . Not real thrilled where the gas tank ended up .

Hell of a deal on a nice survivor bike. Looks like it needs a few pieces to be entirely complete, but that's pretty darn close. Intake, diaphragm carb, throttle assembly, etc. All of those pieces are pretty easy to find. barn find rupp mini bike

Hello All, I am doing a restomod Taco T100 and need some parts! I had complete Ceriani shocks before I left for a business trip, now I don't! Specifically I am missing the aluminum piece that the rod slides through, the small spring that goes over the rod for rebound, and the nut that holds it...

Anyone have links to swaged pipe pieces in 7/8 and/or 1"? Thanks-

Well guys I know it's hard to believe but as of today I'm the proud new owner of the fine custom DB , It appears to be previously owned by Cheezy as you can see , I however was unable to work the clown suit into the deal .This fine example of modern engineering will be parted out completely as...

I am working on a Rupp Ruppster, but the gas tank is missing. I am hopeful that someone on this forum may be able to measure theirs and give me the dimentions so that I can build one. I am also in need of a few other pieces, if you have any for sale, let me know. Pictures would be extremely...

I need the 2 speed setup for a CAT 400TS. Let me know what you've got, I'll buy pieces or complete.

I bought 2 murrays in September. I took them both apart, and have been building one. Does taking the second one apart disqualify me from using it in the buildoff? I mean, it's just in pieces on the floor. :doah:

hello I have a go devil for sale ,disassembled had the frame powder coated and there it sets. I bought it about 4 yrs ago and rode it before taking it apart. Lost interest after removing front tire and breaking the lip on the wheel. I also have the original bag it came in . I have all the...

I've had this in pieces for at least 20 years, got it back when I was a kid. Now I'd like to get it back together for my kids. It has lost some pieces over the years. I'm looking to find parts to assemble the fork. I no longer have the bearings, bolts, springs, lower portion of the fork...

Hey Fellas, I'm hoping someone has this L-shaped piece, and the spring that goes with it laying around. :thumbsup: I believe it comes with a spring that mounts with it as shown in the exploded parts diagram. I've also seen them like this.

I recently acquired a Baja MB200/Warrior?? the one tractor supply sells.. :shrug:. anyway its in pieces the entire bike a lot missing off the frame but that I can deal with. my issue is the 200cc 6.5hp motor that came with it is also in pieces it all seems to be there, I'm sure I could get it...

Any of you guys out there have a couple of pieces of 1"OD- 7/8"ID pipe 8 to 10" in length left over from a frame project or something? I'm attempting to lengthen and put a leading axle on a set of Asuza forks. http://www.oldminibikes.com/forum/photopost/data/500/medium/007182.jpg, here's a pic...

Selling my skat kitty pieces in hopes of securing a kart I really like. Motor is an H25 (unsure of the year). Motor has wrong air filter, the shroud has a dent in it from shipping (not pictured). Motor has spark, I have not put gas and oil in it. This is the motor: Here is the skat...

Since there are no stupid questions (only stupid people, haha), here we go! I bought a little Craftsman powder coater to play with (it was only $35) and in the powder canister, there is what looks to be 2 small pieces of orange foam (look like ear plugs, but one is longer than the other). Is...

A small pile of West Bend engine parts. all the parts are pictured. Stock intakes, and case half. forgive me I dont know alot about west bends. these parts came to me in a trade. All parts look to be usable. No breaks or cracks. I would take $35 for the pile including shipping to...

Looking for the outside rim pieces for the wheel on the frame in the picture . I have a good turbine center I just need the outside halves . If you have some for sale or know where to get these please let me know ?? Thanks I have no use for the frame if anyone is interested in it PM me