tav-30

  1. xBrent92

    I need a stiff TAV-30 Driven spring.

    Where on the interweb sells stiff springs that will fit ? Must be at least twice as stiff as the yellow spring. I'll even cut on it to shorten it if i need to. Let me know, I really like my low to mid range power.
  2. xBrent92

    For Sale or Trade: ORANGE TAV-30 driver springs. $9.50 still new.

    Engagement @ 1500 RPM (stock springs engage at 2200 rpm) Barely used one time when i was experimenting with a really high gear ratio as you can see they are still perfectly straight. At the Comet website it costs $7.90 plus $8 shipping amounting to $15.90 . My total asking price =...
  3. xBrent92

    TAV-30 Max speed limit?

    Just wondering if 42mph is the absolute fastest i can go with a TAV-30 and if i can do anything to help it gain more RPMs but i must first say i have the Yellow driven spring and i drilled a 4th hole and it helps a big noticeable amount on acceleration but i can still only go 42mph. Any...
  4. J

    Comet TAV-30 Torq-A-Verter 3/4" 12T #35, part #215403A

    Looking for the older version Comet TAV-30, mainly because I need the older style backplate that doesn't need modification on a Predator. I'm assuming no one has just the backplate sitting around but message me if you do. Specifically looking for a Comet TAV-30 3/4" 12T #35 chain. I can only...
    • Juno
    • Thread
    • Replies: 3
    • Forum: WANTED
  5. manco12

    The 7" Tav-30 driven doesn't fit on backplate?

    Hey, I've seen people say that you need a custom jackshaft for the 7" driven and can't use the regular steel backplate. Could anyone confirm why you can't? I see that the 7" driven comes in 5/8"...
  6. smoky

    help with TAV-30

    Ok so the bolt that holds the driver on snapped, (still need a new bolt) but i have a problem, when the bolt snapped the driver came off the engine shaft and i have most of the parts for it, i need the drum and i need to know how to reassemble the springs on the driver. Pics would help.
  7. Mac

    Comet TAV-30

    Comet TAV-30 3/4" bore, #35 drive. (No Box) Appears to have been bolted to an engine, but no wear anywhere I can see on the drive surfaces. $150.00 delivered: . . Sale pending (Toycartony)
  8. george3

    tav-30 3/4 drive clutch wanted

    tav-30 3/4 drive clutch wanted. I have a tav-30 tork a verter complete brand new came with the 1" primary drive. I need a 3/4 driver. ok who has got one cheap for me. com on guys I know one of you have this for a good price you have too much stuff anyway so cut loose with one. calguygeo@aol.com
Top