Went digging through some parts and found a set of go power wheels and a 60 tooth rear sprocket. Not sure if I am going sandblast and paint the wheels or get them burnished? And the rear sprocket looks to be in good shape but I was thinking of getting a new one if I can? I know the go power sprockets are hard to come by and I don’t know of anyone that makes new ones currently? It does appear that the sprocket is welded to the drum brake hub so theoretically I could grind off the old welds and remove the old sprocket and have a new sprocket made for it and welded back on. Or maybe leave the existing sprocket and drill it to be used for a newer style split sprocket? Any ideas what I should do?