new to the site and would appreciate any advice i can get. Having trouble choosing a new cam. Engine is powering a modified baja heat. Not track ridden or raced, just an around town and country bike. looking for higher rpm without killing the low end. dont need a torque monster just descent acceleration. here is what the rest of the engin will be:
stock clone block, stock crank, arc rod, dished piston, 26lb springs, 1:1 rockers either on a 14cc stock, or 18cc milled + big valves, re-jetted stock carb pump fed w/ spacer, header, k&n style filter, and a rev s2 finned flywheel. Again i am tearring my hair out on this one and any help would be greatly appreciated!!!
stock clone block, stock crank, arc rod, dished piston, 26lb springs, 1:1 rockers either on a 14cc stock, or 18cc milled + big valves, re-jetted stock carb pump fed w/ spacer, header, k&n style filter, and a rev s2 finned flywheel. Again i am tearring my hair out on this one and any help would be greatly appreciated!!!