I did a little video on replacing a Valve spring with a 18lbs one and setting the lash. Video is only of the exhaust but its the same way for both intake and exhaust. Should be good enough to get most people though doing it. LMK if you have any other questions or suggestions to improve. I think Im going to do a few videos like this.
Next one is Lapping the Flywheel to the crank and setting 8 deg advanced without a timing key.
6:36 on the video.
[YOUTUBE]4QZWV6S-5aA[/YOUTUBE]
Also forgot to add that once you set the lash spin the motor a couple times and recheck the lash. I forgot to do that in the video.
Next one is Lapping the Flywheel to the crank and setting 8 deg advanced without a timing key.
6:36 on the video.
[YOUTUBE]4QZWV6S-5aA[/YOUTUBE]
Also forgot to add that once you set the lash spin the motor a couple times and recheck the lash. I forgot to do that in the video.