box

Will a Hemi MOD2 camshaft work in a Box Stock clone? I have a MOD2 hemi that a YouTube subscriber sent me. With it fit? That might be a good cam for my project.

So I bought this UT2 head and was pretty excited about it. It has a 18cc chamber so it raises compression on my 196 and it has a 26mm intake valve. Last night I found it had a 23mm exhaust not a 24mm as well. I thought O great as the GX200 and clones have disproportionate sized valves anyways...

Today and everyday I am mentally planning my OX project a two wheel drive mini with 26 x 11 x 12 atv tires powered by a modified gx390 and it occurred to me that most off road bikes get stuck when going over a large object that contacts the frame and the wheels loose traction so I thought it...

EB Enterprises 121G - Flux Capacitor | O'Reilly Auto Parts

Lovingly used, It was NOS when I put it on my bike, bike was together for about a year with only occasional use for runs around the hood mainly. It is from a late model factory chrome kit that Tecumseh had, its good chrome, does show some bluing in the hot spot but it should not get any...

Looking for a super bronc battery box. Thanks Joe

12 tooth,35 chain,3.5" dia drum. 3/4 shaft. NOS. $65.00 shipped

Hello everyone I want to add a tach and headlight to my mini bike. So i need to add an battery, but i wanted to some how hide the battery and make it look cool . I got an ammo box i got from Costco and bolted it my front fender. Im not done im still waiting for the battery ,light, switches to...

Any one built a motor from a Box Stock motor?

Hi I purchased this NOS Tec H-50 engine about 8 months ago .The year should be 1994 H50 65403 (B) 4088D\ 3/4" Keyed Shaft I have too many engines and unfortunately wont be using this one any time soon Its in the same condition unused -No oil or gas ever added-in the box as when i purchased...

NOS 1974 Tecumseh H35 in the original box. This is a mini bike specific engine and has a 5/8 shaft... Besides the engine itself being a perfect time capsule, the box also is in amazing condition. The markings on the box that say H35 MB 5/8 are NOT hand written and appears to be an ink stamp, in...

This likely wouldn't be too practical on a minibike, but perhaps may be of interest on a go-kart project. Electric starter motor to bolt to the front of a blowerhousing; not sure as to whether it's a universal design, as there's no instructions in the box, but this starter motor utilizes a...

Does anyone know the measurement between the holes on the Skat Kitty frame for the mounting of the aftermarket battery boxes? I have a box and I need to drill some holes. Thanks, I really need these measurements. Tom novadose74

I'm selling one NOS battery box in mint shape. The exterior is perfect but the interior has a little surface rust where they skimped on the paint. The pics tell the story. The first $25.00 plus $5.00 shipping takes it. PM me if interested. Ogy

I guess I am the neighborhood restoration expert. Restore a few minibikes and people think you know what you're doing. A neighbor gave me this fire box to restore for his wife. What a great piece. He is 75 years old and works for the city. Someone threw this in the trash. Anyway, I have had it...

Rpol89 Clear you message box it is full

Just getting started...

Ok. First the exhaust. I have this welded up header that allows for a muffler to be put on. How much difference if any from the shiny header will there be. Both with the muffler screwed in and without. Second.after putting the fuel pump on yesterday. I came out today and there was a gas leak...

Hi all, obviously brand new to the forum. My cousin and I have been working on restoring an old mini trail bike. To be 100% honest I'm not confident it's a Bonham brand, it very well could be a Sherpa or some other random manufacture. I've installed a new engine in it which is working fine. The...

all these parts are brand new never used bsp 3 cam 20 bucks complete cylinder head with valves and extra springs 40 bucks race ready carb 25bucks billet air filter adaptor 15 bucks