clutches

Ok, so I have this TAV 2 and I need to replace the driven (as can be seen) and for the life of me I cannot get the dang thing off. I have hit it with all kinds of pentrating oil, I even bought a 8" gear puller and I started to get worried about the backplate bending. This thing will not budge...

Are there clutches available to fit the 1 inch cranks of the bigger hp motors and still use the small #35 chain?

Hi,I want to buy a couple of clutches. I currently have a Max-Torque on my Ruttman with an H35. It seems to be flimsy,it's loose and rattles a lot. Is there a stronger,better brand out there? Who sells them? Thanks. Pat

Can someone help me understand the basics when putting together a set up? The minibike kit I'm looking at (AZUSA) comes with a 72 tooth sprocket. I'm buying the motor from NR-Racing. Neither of these guys sell clutches. The guy at NR-Racing recommended a 12 or 13 tooth Max Torque clone...

I have about 3 engines with 1" output shafts. Horsepower ratings range from 6HP to 20+HP. Aside from "Damn they're expensive!" What all can you tell me about clutches in this range? Thanks ~JM~

briggs wf, modified clone, modified tec 60, gx 240, arctic cat 275 with twin magnetos and cent clutch, flathead cams, heads, parts, much more.....

I am looking for somewhere to order a centrifugal clutch for a 1" shaft. The trouble I am having is finding one for a 13hp engine. I have used a couple of different ones rated for less HP but they wont last 15 minutes. I have looked online but cant find anything. Can you guy's steer me to a...

They are made by Baja Motorsports. Does anyone know if these are comparable to Comet or Max Torque? They have them in stock, where as I'd have to wait for either of the others.

i got a mercury clutch on a parts bike i picked up the other day and never seeing one before was wondering if they are rare and around how old might it be it is two peices with a 12 t sprocket is quite thick much thicker than a comet or max trq any info is apreciated and i will post some...

In the near future I will be needing to buy several feet of chain, a few clutches, bearings, jack-shaft assemblies, etc. Who makes & sells the good stuff? I want to buy good ole "Made In The USA" products as much as possible. I would like to standardize & use #35 chain on everything. At...