drag

Any of you guys have a lead or could point me where to buy a frame or roller? I wanted to build my own but don't have much time lately so I'm thinking if buying a rolling chassis. New or used Sent from my iPhone using Tapatalk

Professionally built, Intek motor on alky by Randi, Custom Tillotson carb by Korndog, DB frame, Disc brake, Tomar clutch, custom everything. 11:18 @ 64MPH. 1/8th mile and still pulling hard. $2300 + invested. Pick it up for $1200. Comes with new sealed 5 gal can VP alky. Yeah 11's aren't...

Well this is my take on a drag bike. It was originally a Wards bike, but it was stripped down and missing to many parts so I decided it would be this instead. I had a longer rear swing arm built. Chopped the handle bars down. Braking will be provided be a rear disc brake from a pocket bike and...

Building my son a mini drag bike This is the most fun I have had in years Any way on to the bike. It started as a x1 pocket bike I just got friday as a roller. Bike specs custom made arm for 18-8 slick Torque converter with 4200 stall Flathead with few mods and alky tiltson (23hp)...

Hello any one got some drag bike build sheets they could send. some thing like the on in the link thanks.. Alex http://outlawfabshop.net/images/charles_small_tire_6_small_web.jpg

Any one Got a Ruttman toad Drag Bike, Post some pics of it

im going to be running my drag bike in the spring and was wondering what my gears should be in a 1/8 mile. right now i got a 8hp clone with 12 tooth clutch. what should my gears be out back. thank

hello, im going to be building a mini drag bike. what kind of a set up do i need for the rear, i know i need 1" Bearing Kit (2 hole), sprocket, sprocket hub, and a wheel hub, an axle, what else am i missing.

Head manufactured by PM-1 Custom Shop, Eldorado Springs, MO. Head Is for Jr Dragster 5hp Briggs Flathead. I was told used with 3" bore/ big stroked engine. I measured cc's with Briggs sparkplug installed and measured approx 94cc's. Appears never used, but has had the combustion area...

Just like the flu the mini bike bug is spreading. After reading this forum for some time I decided to start my own project. It will be powered by an Animal engine that will be modified. Rear tire is 11.5" tall x 6 wide. The frame is my design and is about 50" long axle to axle. Here are...

Looking for a drag bike with a motor prefer a big block bike

I'm trying to see im anyone has any info on the Nitro 44 drag mini bike kit that is in the barstool racer website . I'm considering ordering , but trying to get some info of one of these actually being in complete operating form , or just pics on a website . they are also shown on 909 nitro...

Hi all starting my first drag project. A little background wife bought a minibike for me at a local garage sale 25$ had a 3hp brigs. Was fun for about a week or two and it got put up in the garage. I ran into a video of a mini drag bike just happened to be a video by MDB I looked more into the...

Hi all starting my first drag project. A little background wife bought a minibike for me at a local garage sale 25$ had a 3hp brigs. Was fun for about a week or two and it got put up in the garage. I ran into a video of a mini drag bike just happened to be a video by MDB I looked more into the...

NITRO 44 Mini Drag Bike ROLLING CHASSIS

Drag Mini Bike Queens NY $350 Its have a Drag Mini bike I just built. Has a Petter carb.. full exhaust.. full intakeha stretched frame...and disk brake ..extremely fast and 212CC Predator motor is New.. Just need cash so I'm selling it $350 Queens NY Pickup only 3156646675

Hey guys. i have a modded predator with mod 2 cam and billet goodies ported heads and 18lbs springs and .37 jet with intake and exhaust. im looking for the best spocket for a drag only 100ft i have a 60t on now and i take off good without coming off the ground but once the cam kicks in it...

My old Candy Red drag bike minus the white seat and my engine. Bonanza Vintage Mini Bike | eBay Curious to see if/what it sells for :doah:

Hey guys im looking for more power mostly for drag race. im running a predator with a milled head .050 and a mod 2 cam, 18lb springs,.037 jet with intake and straight pipe. gov is removed so i have billet goodies. stock timing would 93 or 116 fuel make it faster i normally run 87 reg any tips...

I am looking to build a drag mini bike. I have been looking at the frame kit from CMS in Calif.Anybody have any experience or comments on this frame? Also if anyone has a project they want to part with I am interested. I have a Blockzilla motor for it and would like a sretched frame. Thanks for...