drag

What is the best cam to use for drag racing? The engine is a Briggs WF. stock valves. 1.3 rockers and a Mikuni tm24. Later on will be shaved about .050" and larger valves. Distance is 1/8 mi. Minibike is the vehicle.

What are the pro's and con's of each? I am currently running a tav on my mini, launching with the tav is great but the shifting is killing the top speed. Running only an 1/8 mi. Top speed has been 53mph.

I just acquired a built Tecumseh H50 from Clements racing. Which needs rebuild. Mike states on alcohol it should make 20 hp and around 17 on gas. I want to run a jr. dragster torque converter. The problem I see is that the jackshafts that are made for such a setup puts the driven down...

Looking to buy a complete mini dragbike

Looking to buy a drag mini bike.

Time to upgrade the 212cc motor in the bike. Went with Vegas carts bare bones 460cc kit, minidragbike Charles is doing the head (big valve welded chamber)and specing out a .400 lift cam, gage roller rockers, mikuni 42mm carb for now, raceeng flywheel, bully 1" turbo 4 disk, 92mm forged flat top...

Looked like a Ruttman from the CL photo, but now I'm not sure. Springer front end.

Hey guys, building a small drag bike/trike at the moment, ill post up photos of the build on its journey to being completed and would love to hear opinions/suggestions!

Where do you get your wheel setups!? Purchasing a frame and gettin ready to drag it.. Best places for wheel sets and such?? Thanks for any feedback

who's the fast in the D?

Bonanza drag bike from Dave miller concepts. Not my thing but looks like it would be fun to ride. If your gonna have a drag bike mine as well be a bonanza.

The local drags are coming up and just wondering what you guys would run for gear/clutch package. The drag is 100 feet long. I will be in modified division. HEMI, ROD, FLYWHEEL, MOD2 CHEATA CAM, 18 LB SPRINGS, UNI FILTER, HEADER, #38 JET WITH TUBE I just ordered a hilliard inferno clutch 12...

Looking for drag frame and or complete drag bike....Let me know what you have!! Pics please

I decided to put my slick drag tire on my lil indian. Dose it look okay?

Another drag build finished. Can't wait to let it rip. I know everyone likes pics so I thought I would post it. And the one with the round slide is a cruiser motor that I built along with it. The cruiser should be pretty peppy as well.

Wanted to say thanks to mbones for dropping by while spending a visit to Ontario, Canada :thumbsup: Pretty cool of you to do so, now I can place one face to the forum. Had shown him The Freezing cold shop, Go-Joe body and parts of the Drag bike. Also shown him some of the decals I've made...

Have any of yall tried the manual clutch that was built a while back, if so ..what are your findings? I like the idea, and want to build a drag mini bike.. but wonder if it will take the power ( 30 to 34hp)

I modded a predator 212 to put on my mini bike to drag race it 1/8 mile. Mods include fuel pump, billet flywheel, billet connecting rod, mod 2 cheater cam, 18lb springs, high flow carb, air filter, aftermarket header and RLV muffler. The engine is running on 100 octane racing fuel. I am running...

I'm new to the minibike hobby, but so far I'm having a ball building and riding mini bikes at car shows and in the pits at drag races I recently started a new project in which I had to learn how to weld and bend tube mostly by watching videos on YouTube lol.. next I'm going to try my hand at...

This looks like a bit of fun... V8 mower drag race. - YouTube