Does antbody know what the diffrence is between the drive belt for a 70 roadster #15162 and the drive belts for 71 and newer bikes #17617? I see there is a diffrent belt guard too. The 15162 number crosses to a gates 6083 that is available but it's over an inch wide and like 43 inches log.
I picked up this little 3.5hp Tec today at the scrapyard. It has a clutch on it like I've never seen before. Both belt and chain drive. I removed it from the motor, only to find out that it is made specific to this engine/shaft. The shaft is stepped down twice.
Not really sure what this motor...
I cleaned the drive put it back together, bought a new belt put everything on and back together. I start it up and nothing. Drive just doesnt seem to be engaging far enough to grab the belt. What do I do? I cleaned it all out everything seems good. are the weights wore out, the springs are...
Well I saw this on C list on monday, but I could not get it bought until last night. I had to drive 6 stinkin hours round trip but these cute little bikes are worth it, and I believe from the pictures I have seen of these, this might be an early one. And it has all of the hard to find bits...
I have some questions about my Comet torque converter. I want to make sure I install it on my motor correct.
It came on a 285 Manco Dingo back in 1986ish. When I received the kart, the driven part is still attached. I do see it has 3 buttons and one is missing. Other than that, I think I have...
The drive train recieved dark machinery grey Rustoleum, and the engine was reassembled and the body painted.
This is on the specially built trainer, ready to be hauled to the fun site.
This is still all "show iron", and the details for clutch hydraulics, wiring, fenders...
So i bought an old wards buffalo "mini" bike... as most of you know, they're actually pretty far from mini, but that's mostly why i bought it. She has outgrown her baja 5.5 so that was passed down to her little sister and she needed something bigger. Once i got it home though and took a look at...
Picked up a chopper mini bike. Bike was eqipped with kind of a chain saw engine set up. I have a GX 160 Honda I want to install. I am looking at this bike when I realize the chain is on the wrong side of the bike. I think I can reverse the rim and remount the tire ( tire is directional ) The...
What was the name of the mini that had tandem rear wheels? I've searched this site to the best of my ability and cant come up with the name or a pic. Had a chance to buy one years ago and have been kicking myself for not doing it since.
building a fat cat style bike with a close el burro type frame stuffing a 16 hp honda clone and have bought a comet 40 series driven and looked on gokart supply and saw they have g4000 drive clutch i'm hoping its a comet and this a part# no gtc,s i hope i've posted in the right area?
I have two of these tracks from a Honda snowblower. Anyone want to experiment with a track drive mini? $30.00 shipped for one or $50.00 shipped for both.
hi i'm starting a new project on a packmule roller i will be putting in a 6.5 clone just for now,period correct tec.7hp when i find one.drive line is all there and not really hacked but all the chains and sprockets are different sizes, 420 on rear wheel,40 on jac 35 to clutch,im sure thats not...
okay, so most mini bike drive shafts have the clutch mounted on them.
can i go and mount a sprocket on the drive shaft and put the clutch on the jackshaft?
is this a bad idea?
why?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.